diff --git a/docs/sphinx_conf/Makefile b/docs/sphinx_conf/Makefile
deleted file mode 100644
index 8b72642c591d35abeac62b6774b7bd6ffc5a8f2c..0000000000000000000000000000000000000000
--- a/docs/sphinx_conf/Makefile
+++ /dev/null
@@ -1,177 +0,0 @@
-# Makefile for Sphinx documentation
-#
-
-# You can set these variables from the command line.
-SPHINXOPTS    =
-SPHINXBUILD   = sphinx-build
-PAPER         =
-BUILDDIR      = build
-
-# User-friendly check for sphinx-build
-ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1)
-$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/)
-endif
-
-# Internal variables.
-PAPEROPT_a4     = -D latex_paper_size=a4
-PAPEROPT_letter = -D latex_paper_size=letter
-ALLSPHINXOPTS   = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) sources
-# the i18n builder cannot share the environment and doctrees with the others
-I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) sources
-
-.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext
-
-help:
-	@echo "Please use \`make <target>' where <target> is one of"
-	@echo "  html       to make standalone HTML files"
-	@echo "  dirhtml    to make HTML files named index.html in directories"
-	@echo "  singlehtml to make a single large HTML file"
-	@echo "  pickle     to make pickle files"
-	@echo "  json       to make JSON files"
-	@echo "  htmlhelp   to make HTML files and a HTML help project"
-	@echo "  qthelp     to make HTML files and a qthelp project"
-	@echo "  devhelp    to make HTML files and a Devhelp project"
-	@echo "  epub       to make an epub"
-	@echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
-	@echo "  latexpdf   to make LaTeX files and run them through pdflatex"
-	@echo "  latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
-	@echo "  text       to make text files"
-	@echo "  man        to make manual pages"
-	@echo "  texinfo    to make Texinfo files"
-	@echo "  info       to make Texinfo files and run them through makeinfo"
-	@echo "  gettext    to make PO message catalogs"
-	@echo "  changes    to make an overview of all changed/added/deprecated items"
-	@echo "  xml        to make Docutils-native XML files"
-	@echo "  pseudoxml  to make pseudoxml-XML files for display purposes"
-	@echo "  linkcheck  to check all external links for integrity"
-	@echo "  doctest    to run all doctests embedded in the documentation (if enabled)"
-
-clean:
-	rm -rf $(BUILDDIR)/*
-
-html:
-	$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
-	@echo
-	@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
-
-dirhtml:
-	$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
-	@echo
-	@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
-
-singlehtml:
-	$(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
-	@echo
-	@echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
-
-pickle:
-	$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
-	@echo
-	@echo "Build finished; now you can process the pickle files."
-
-json:
-	$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
-	@echo
-	@echo "Build finished; now you can process the JSON files."
-
-htmlhelp:
-	$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
-	@echo
-	@echo "Build finished; now you can run HTML Help Workshop with the" \
-	      ".hhp project file in $(BUILDDIR)/htmlhelp."
-
-qthelp:
-	$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
-	@echo
-	@echo "Build finished; now you can run "qcollectiongenerator" with the" \
-	      ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
-	@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/ParMeS.qhcp"
-	@echo "To view the help file:"
-	@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/ParMeS.qhc"
-
-devhelp:
-	$(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
-	@echo
-	@echo "Build finished."
-	@echo "To view the help file:"
-	@echo "# mkdir -p $$HOME/.local/share/devhelp/ParMeS"
-	@echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/ParMeS"
-	@echo "# devhelp"
-
-epub:
-	$(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
-	@echo
-	@echo "Build finished. The epub file is in $(BUILDDIR)/epub."
-
-latex:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo
-	@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
-	@echo "Run \`make' in that directory to run these through (pdf)latex" \
-	      "(use \`make latexpdf' here to do that automatically)."
-
-latexpdf:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo "Running LaTeX files through pdflatex..."
-	$(MAKE) -C $(BUILDDIR)/latex all-pdf
-	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-latexpdfja:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo "Running LaTeX files through platex and dvipdfmx..."
-	$(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
-	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-text:
-	$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
-	@echo
-	@echo "Build finished. The text files are in $(BUILDDIR)/text."
-
-man:
-	$(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
-	@echo
-	@echo "Build finished. The manual pages are in $(BUILDDIR)/man."
-
-texinfo:
-	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
-	@echo
-	@echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
-	@echo "Run \`make' in that directory to run these through makeinfo" \
-	      "(use \`make info' here to do that automatically)."
-
-info:
-	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
-	@echo "Running Texinfo files through makeinfo..."
-	make -C $(BUILDDIR)/texinfo info
-	@echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
-
-gettext:
-	$(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
-	@echo
-	@echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
-
-changes:
-	$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
-	@echo
-	@echo "The overview file is in $(BUILDDIR)/changes."
-
-linkcheck:
-	$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
-	@echo
-	@echo "Link check complete; look for any errors in the above output " \
-	      "or in $(BUILDDIR)/linkcheck/output.txt."
-
-doctest:
-	$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
-	@echo "Testing of doctests in the sources finished, look at the " \
-	      "results in $(BUILDDIR)/doctest/output.txt."
-
-xml:
-	$(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
-	@echo
-	@echo "Build finished. The XML files are in $(BUILDDIR)/xml."
-
-pseudoxml:
-	$(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
-	@echo
-	@echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."
diff --git a/docs/sphinx_conf/make.bat b/docs/sphinx_conf/make.bat
deleted file mode 100644
index 844262e199abf23bf88ddbbb6f12a82febdeccb1..0000000000000000000000000000000000000000
--- a/docs/sphinx_conf/make.bat
+++ /dev/null
@@ -1,242 +0,0 @@
-@ECHO OFF
-
-REM Command file for Sphinx documentation
-
-if "%SPHINXBUILD%" == "" (
-	set SPHINXBUILD=sphinx-build
-)
-set BUILDDIR=build
-set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% source
-set I18NSPHINXOPTS=%SPHINXOPTS% source
-if NOT "%PAPER%" == "" (
-	set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS%
-	set I18NSPHINXOPTS=-D latex_paper_size=%PAPER% %I18NSPHINXOPTS%
-)
-
-if "%1" == "" goto help
-
-if "%1" == "help" (
-	:help
-	echo.Please use `make ^<target^>` where ^<target^> is one of
-	echo.  html       to make standalone HTML files
-	echo.  dirhtml    to make HTML files named index.html in directories
-	echo.  singlehtml to make a single large HTML file
-	echo.  pickle     to make pickle files
-	echo.  json       to make JSON files
-	echo.  htmlhelp   to make HTML files and a HTML help project
-	echo.  qthelp     to make HTML files and a qthelp project
-	echo.  devhelp    to make HTML files and a Devhelp project
-	echo.  epub       to make an epub
-	echo.  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter
-	echo.  text       to make text files
-	echo.  man        to make manual pages
-	echo.  texinfo    to make Texinfo files
-	echo.  gettext    to make PO message catalogs
-	echo.  changes    to make an overview over all changed/added/deprecated items
-	echo.  xml        to make Docutils-native XML files
-	echo.  pseudoxml  to make pseudoxml-XML files for display purposes
-	echo.  linkcheck  to check all external links for integrity
-	echo.  doctest    to run all doctests embedded in the documentation if enabled
-	goto end
-)
-
-if "%1" == "clean" (
-	for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i
-	del /q /s %BUILDDIR%\*
-	goto end
-)
-
-
-%SPHINXBUILD% 2> nul
-if errorlevel 9009 (
-	echo.
-	echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
-	echo.installed, then set the SPHINXBUILD environment variable to point
-	echo.to the full path of the 'sphinx-build' executable. Alternatively you
-	echo.may add the Sphinx directory to PATH.
-	echo.
-	echo.If you don't have Sphinx installed, grab it from
-	echo.http://sphinx-doc.org/
-	exit /b 1
-)
-
-if "%1" == "html" (
-	%SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The HTML pages are in %BUILDDIR%/html.
-	goto end
-)
-
-if "%1" == "dirhtml" (
-	%SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml.
-	goto end
-)
-
-if "%1" == "singlehtml" (
-	%SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml.
-	goto end
-)
-
-if "%1" == "pickle" (
-	%SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished; now you can process the pickle files.
-	goto end
-)
-
-if "%1" == "json" (
-	%SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished; now you can process the JSON files.
-	goto end
-)
-
-if "%1" == "htmlhelp" (
-	%SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished; now you can run HTML Help Workshop with the ^
-.hhp project file in %BUILDDIR%/htmlhelp.
-	goto end
-)
-
-if "%1" == "qthelp" (
-	%SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished; now you can run "qcollectiongenerator" with the ^
-.qhcp project file in %BUILDDIR%/qthelp, like this:
-	echo.^> qcollectiongenerator %BUILDDIR%\qthelp\ParMeS.qhcp
-	echo.To view the help file:
-	echo.^> assistant -collectionFile %BUILDDIR%\qthelp\ParMeS.ghc
-	goto end
-)
-
-if "%1" == "devhelp" (
-	%SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished.
-	goto end
-)
-
-if "%1" == "epub" (
-	%SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The epub file is in %BUILDDIR%/epub.
-	goto end
-)
-
-if "%1" == "latex" (
-	%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished; the LaTeX files are in %BUILDDIR%/latex.
-	goto end
-)
-
-if "%1" == "latexpdf" (
-	%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
-	cd %BUILDDIR%/latex
-	make all-pdf
-	cd %BUILDDIR%/..
-	echo.
-	echo.Build finished; the PDF files are in %BUILDDIR%/latex.
-	goto end
-)
-
-if "%1" == "latexpdfja" (
-	%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
-	cd %BUILDDIR%/latex
-	make all-pdf-ja
-	cd %BUILDDIR%/..
-	echo.
-	echo.Build finished; the PDF files are in %BUILDDIR%/latex.
-	goto end
-)
-
-if "%1" == "text" (
-	%SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The text files are in %BUILDDIR%/text.
-	goto end
-)
-
-if "%1" == "man" (
-	%SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The manual pages are in %BUILDDIR%/man.
-	goto end
-)
-
-if "%1" == "texinfo" (
-	%SPHINXBUILD% -b texinfo %ALLSPHINXOPTS% %BUILDDIR%/texinfo
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The Texinfo files are in %BUILDDIR%/texinfo.
-	goto end
-)
-
-if "%1" == "gettext" (
-	%SPHINXBUILD% -b gettext %I18NSPHINXOPTS% %BUILDDIR%/locale
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The message catalogs are in %BUILDDIR%/locale.
-	goto end
-)
-
-if "%1" == "changes" (
-	%SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.The overview file is in %BUILDDIR%/changes.
-	goto end
-)
-
-if "%1" == "linkcheck" (
-	%SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Link check complete; look for any errors in the above output ^
-or in %BUILDDIR%/linkcheck/output.txt.
-	goto end
-)
-
-if "%1" == "doctest" (
-	%SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Testing of doctests in the sources finished, look at the ^
-results in %BUILDDIR%/doctest/output.txt.
-	goto end
-)
-
-if "%1" == "xml" (
-	%SPHINXBUILD% -b xml %ALLSPHINXOPTS% %BUILDDIR%/xml
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The XML files are in %BUILDDIR%/xml.
-	goto end
-)
-
-if "%1" == "pseudoxml" (
-	%SPHINXBUILD% -b pseudoxml %ALLSPHINXOPTS% %BUILDDIR%/pseudoxml
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The pseudo-XML files are in %BUILDDIR%/pseudoxml.
-	goto end
-)
-
-:end