From 33e0ca6136e2e4fb92cf2a1d569fc961d0dc18a4 Mon Sep 17 00:00:00 2001
From: Ian Lance Taylor <ian@airs.com>
Date: Thu, 7 May 1998 21:28:06 +0000
Subject: [PATCH] * ltconfig, ltmain.sh: Avoid producing a version
number if -version-info was not used.
---
ChangeLog | 5 +
ltconfig | 47 +-
ltmain.sh | 2554 +++++++++++++++++++++++++++++++++--------------------
3 files changed, 1649 insertions(+), 957 deletions(-)
diff --git a/ChangeLog b/ChangeLog
index 584b0b532eb..2bbb2bf118e 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,8 @@
+Thu May 7 17:27:35 1998 Ian Lance Taylor <ian@cygnus.com>
+
+ * ltconfig, ltmain.sh: Avoid producing a version number if
+ -version-info was not used.
+
start-sanitize-java
Wed May 6 10:26:06 1998 Stu Grossman <grossman@babylon-5.cygnus.com>
diff --git a/ltconfig b/ltconfig
index 1a06572c85b..5d5f620c7fc 100755
--- a/ltconfig
+++ b/ltconfig
@@ -779,8 +779,8 @@ __dll_entry (HINSTANCE hinst, DWORD reason, LPVOID reserved)
_impure_ptr = __imp_reent_data;
}
' > libtool.c
- archive_cmds='$CC -c libtool.c;echo EXPORTS > $soname.def;$NM$libobjs | $global_symbol_pipe | sed '\''s/.* //'\'' >> $soname.def;$LD -s --base-file $soname.base --dll -e ___dll_entry@12 -o $lib libtool.o$libobjs$deplibs;$DLLTOOL --as=$AS --dllname $soname --def $soname.def --base-file $soname.base --output-exp $soname.exp;$LD -s --base-file $soname.base $soname.exp --dll -e ___dll_entry@12 -o $lib libtool.o$libobjs$deplibs;$DLLTOOL --as=$AS --dllname $soname --def $soname.def --base-file $soname.base --output-exp $soname.exp;$LD $soname.exp --dll -e ___dll_entry@12 -o $lib libtool.o$libobjs$deplibs;$rm libtool.o $soname.base $soname.exp'
- old_archive_from_new_cmds='$DLLTOOL --as=$AS --dllname $soname --def $soname.def --output-lib $objdir/$libname.a'
+ archive_cmds='$CC -c '"`pwd`"'/libtool.c;echo EXPORTS > $soname-def;$NM$libobjs | $global_symbol_pipe | sed '\''s/.* //'\'' >> $soname-def;$LD -s --base-file $soname-base --dll -e ___dll_entry@12 -o $lib libtool.o$libobjs$deplibs;$DLLTOOL --as=$AS --dllname $soname --def $soname-def --base-file $soname-base --output-exp $soname-exp;$LD -s --base-file $soname-base $soname-exp --dll -e ___dll_entry@12 -o $lib libtool.o$libobjs$deplibs;$DLLTOOL --as=$AS --dllname $soname --def $soname-def --base-file $soname-base --output-exp $soname-exp;$LD $soname-exp --dll -e ___dll_entry@12 -o $lib libtool.o$libobjs$deplibs;$rm libtool.o $soname-base $soname-exp'
+ old_archive_from_new_cmds='$DLLTOOL --as=$AS --dllname $soname --def $soname-def --output-lib $objdir/$libname.a;$rm $soname-def'
;;
# FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
@@ -1149,11 +1149,11 @@ echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6
case "$host_os" in
aix3* | aix4*)
version_type=linux
- library_names_spec='${libname}${release}.so.$versuffix $libname.a'
+ library_names_spec='${libname}${release}.so$versuffix $libname.a'
shlibpath_var=LIBPATH
# AIX has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}.so.$major'
+ soname_spec='${libname}${release}.so$major'
;;
amigaos*)
@@ -1163,21 +1163,22 @@ amigaos*)
;;
cygwin32*)
- library_names_spec='${libname}${release}.dll $libname.a'
+ version_type=windows
+ library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.a'
dynamic_linker='Win32 ld.exe'
shlibpath_var=PATH
;;
freebsd2* | freebsd3*)
version_type=sunos
- library_names_spec='${libname}${release}.so.$versuffix $libname.so'
+ library_names_spec='${libname}${release}.so$versuffix $libname.so'
finish_cmds='PATH="$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
;;
gnu*)
version_type=sunos
- library_names_spec='${libname}${release}.so.$versuffix'
+ library_names_spec='${libname}${release}.so$versuffix'
shlibpath_var=LD_LIBRARY_PATH
;;
@@ -1187,8 +1188,8 @@ hpux9* | hpux10* | hpux11*)
dynamic_linker="$host_os dld.sl"
version_type=sunos
shlibpath_var=SHLIB_PATH
- library_names_spec='${libname}${release}.sl.$versuffix ${libname}${release}.sl.$major $libname.sl'
- soname_spec='${libname}${release}.sl.$major'
+ library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
+ soname_spec='${libname}${release}.sl$major'
# HP-UX runs *really* slowly unless shared libraries are mode 555.
postinstall_cmds='chmod 555 $lib'
;;
@@ -1196,7 +1197,7 @@ hpux9* | hpux10* | hpux11*)
irix5* | irix6*)
version_type=osf
soname_spec='${libname}${release}.so'
- library_names_spec='${libname}${release}.so.$versuffix $libname.so'
+ library_names_spec='${libname}${release}.so$versuffix $libname.so'
shlibpath_var=LD_LIBRARY_PATH
;;
@@ -1208,8 +1209,8 @@ linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
# This must be Linux ELF.
linux-gnu*)
version_type=linux
- library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major $libname.so'
- soname_spec='${libname}${release}.so.$major'
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
finish_cmds='PATH="$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
@@ -1226,7 +1227,7 @@ linux-gnu*)
netbsd* | openbsd*)
version_type=sunos
- library_names_spec='${libname}${release}.so.$versuffix'
+ library_names_spec='${libname}${release}.so$versuffix'
finish_cmds='PATH="$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
;;
@@ -1241,42 +1242,42 @@ os2*)
osf3* | osf4*)
version_type=osf
soname_spec='${libname}${release}.so'
- library_names_spec='${libname}${release}.so.$versuffix $libname.so'
+ library_names_spec='${libname}${release}.so$versuffix $libname.so'
shlibpath_var=LD_LIBRARY_PATH
;;
sco3.2v5*)
version_type=osf
- soname_spec='${libname}${release}.so.$major'
- library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
shlibpath_var=LD_LIBRARY_PATH
;;
solaris2*)
version_type=linux
- library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major $libname.so'
- soname_spec='${libname}${release}.so.$major'
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
shlibpath_var=LD_LIBRARY_PATH
;;
sunos4*)
version_type=sunos
- library_names_spec='${libname}${release}.so.$versuffix'
+ library_names_spec='${libname}${release}.so$versuffix'
finish_cmds='PATH="$PATH:/usr/etc" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
;;
sysv4.2uw2*)
version_type=linux
- library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major $libname.so'
- soname_spec='${libname}${release}.so.$major'
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
shlibpath_var=LD_LIBRARY_PATH
;;
uts4*)
version_type=linux
- library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major $libname.so'
- soname_spec='${libname}${release}.so.$major'
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
shlibpath_var=LD_LIBRARY_PATH
;;
diff --git a/ltmain.sh b/ltmain.sh
index daa2ddf6ab5..7fd5193cb51 100644
--- a/ltmain.sh
+++ b/ltmain.sh
@@ -1,6 +1,7 @@
# ltmain.sh - Provide generalized library-building support services.
-# Generated automatically from ltmain.sh.in by configure.
-# Copyright (C) 1996, 1997 Free Software Foundation, Inc.
+# NOTE: Changing this file will not affect anything until you rerun ltconfig.
+#
+# Copyright (C) 1996-1998 Free Software Foundation, Inc.
# Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This program is free software; you can redistribute it and/or modify
@@ -23,30 +24,41 @@
# the same distribution terms that you use for the rest of that program.
# The name of this program.
-progname=`echo "$0" | sed 's%^.*/%%'`
+progname=`$echo "$0" | sed 's%^.*/%%'`
+modename="$progname"
# Constants.
PROGRAM=ltmain.sh
PACKAGE=libtool
-VERSION=1.0
+VERSION=1.2
default_mode=
help="Try \`$progname --help' for more information."
magic="%%%MAGIC variable%%%"
mkdir="mkdir"
mv="mv -f"
-objdir=.libs
rm="rm -f"
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e s/^X//'
+sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+
if test "$LTCONFIG_VERSION" != "$VERSION"; then
- echo "$progname: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2
+ echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2
echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
exit 1
fi
-#
if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
- echo "$progname: not configured to build any kind of library" 1>&2
+ echo "$modename: not configured to build any kind of library" 1>&2
echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
exit 1
fi
@@ -57,8 +69,9 @@ nonopt=
prev=
prevopt=
run=
-show=echo
+show="$echo"
show_help=
+execute_dlfiles=
# Parse our command line options once, thoroughly.
while test $# -gt 0
@@ -67,13 +80,21 @@ do
shift
case "$arg" in
- -*=*) optarg=`echo "$arg" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+ -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
*) optarg= ;;
esac
# If the previous option needs an argument, assign it.
if test -n "$prev"; then
- eval "$prev=\$arg"
+ case "$prev" in
+ execute_dlfiles)
+ eval "$prev=\"\$$prev \$arg\""
+ ;;
+ *)
+ eval "$prev=\$arg"
+ ;;
+ esac
+
prev=
prevopt=
continue
@@ -114,9 +135,18 @@ do
--mode) prevopt="--mode" prev=mode ;;
--mode=*) mode="$optarg" ;;
+ --quiet | --silent)
+ show=:
+ ;;
+
+ -dlopen)
+ prevopt="-dlopen"
+ prev=execute_dlfiles
+ ;;
+
-*)
- echo "$progname: unrecognized option \`$arg'" 1>&2
- echo "$help" 1>&2
+ $echo "$modename: unrecognized option \`$arg'" 1>&2
+ $echo "$help" 1>&2
exit 1
;;
@@ -127,20 +157,18 @@ do
esac
done
-
if test -n "$prevopt"; then
- echo "$progname: option \`$prevopt' requires an argument" 1>&2
- echo "$help" 1>&2
+ $echo "$modename: option \`$prevopt' requires an argument" 1>&2
+ $echo "$help" 1>&2
exit 1
fi
-
if test -z "$show_help"; then
# Infer the operation mode.
if test -z "$mode"; then
case "$nonopt" in
- *cc)
+ *cc | *++ | gcc* | *-gcc*)
mode=link
for arg
do
@@ -152,83 +180,129 @@ if test -z "$show_help"; then
esac
done
;;
- *install*|cp)
+ *db | *dbx)
+ mode=execute
+ ;;
+ *install*|cp|mv)
mode=install
;;
*rm)
mode=uninstall
;;
- *.la)
- mode=dlname
- ;;
*)
+ # If we have no mode, but dlfiles were specified, then do execute mode.
+ test -n "$execute_dlfiles" && mode=execute
+
# Just use the default operation mode.
if test -z "$mode"; then
- if test -n "$nonopt"; then
- echo "$progname: warning: cannot infer operation mode from \`$nonopt'" 1>&2
- else
- echo "$progname: warning: cannot infer operation mode without MODE-ARGS" 1>&2
- fi
+ if test -n "$nonopt"; then
+ $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
+ else
+ $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
+ fi
fi
;;
esac
fi
+ # Only execute mode is allowed to have -dlopen flags.
+ if test -n "$execute_dlfiles" && test "$mode" != execute; then
+ $echo "$modename: unrecognized option \`-dlopen'" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
# Change the help message to a mode-specific one.
generic_help="$help"
- help="Try \`$progname --help --mode=$mode' for more information."
+ help="Try \`$modename --help --mode=$mode' for more information."
# These modes are in order of execution frequency so that they run quickly.
case "$mode" in
# libtool compile mode
compile)
- progname="$progname: compile"
+ modename="$modename: compile"
# Get the compilation command and the source file.
- base_compile="$nonopt"
+ base_compile=
lastarg=
- srcfile=
+ srcfile="$nonopt"
+ suppress_output=
for arg
do
- # Quote any args containing shell metacharacters.
+ # Accept any command-line options.
case "$arg" in
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*|*\"*)
- quote_arg="'$arg'" ;;
- *) quote_arg="$arg" ;;
+ -o)
+ $echo "$modename: you cannot specify the output filename with \`-o'" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ ;;
+
+ -static)
+ build_libtool_libs=no
+ build_old_libs=yes
+ continue
+ ;;
+ esac
+
+ # Accept the current argument as the source file.
+ lastarg="$srcfile"
+ srcfile="$arg"
+
+ # Aesthetically quote the previous argument.
+
+ # Backslashify any backslashes, double quotes, and dollar signs.
+ # These are the only characters that are still specially
+ # interpreted inside of double-quoted scrings.
+ lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
+
+ # Double-quote args containing other shell metacharacters.
+ # Many Bourne shells cannot handle close brackets correctly in scan
+ # sets, so we specify it separately.
+ case "$lastarg" in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ lastarg="\"$lastarg\""
+ ;;
esac
- base_compile="$base_compile$lastarg"
- srcfile="$quote_arg"
- lastarg=" $srcfile"
+ # Add the previous argument to base_compile.
+ if test -z "$base_compile"; then
+ base_compile="$lastarg"
+ else
+ base_compile="$base_compile $lastarg"
+ fi
done
# Get the name of the library object.
- libobj=`echo "$srcfile" | sed -e 's%^.*/%%'`
+ libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
# Recognize several different file suffixes.
- xform='[cCFSf]'
+ xform='[cCFSfms]'
case "$libobj" in
- *.c++) xform='c++' ;;
+ *.ada) xform=ada ;;
+ *.adb) xform=adb ;;
+ *.ads) xform=ads ;;
+ *.asm) xform=asm ;;
+ *.c++) xform=c++ ;;
*.cc) xform=cc ;;
*.cpp) xform=cpp ;;
*.cxx) xform=cxx ;;
*.f90) xform=f90 ;;
- *.for) xform='for' ;;
+ *.for) xform=for ;;
esac
- libobj=`echo "$libobj" | sed -e "s/\.$xform$/.lo/"`
+ libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
case "$libobj" in
- *.lo) obj=`echo "$libobj" | sed -e 's/\.lo$/.o/'` ;;
+ *.lo) obj=`$echo "X$libobj" | $Xsed -e 's/\.lo$/.o/'` ;;
*)
- echo "$progname: cannot determine name of library object from \`$srcfile'" 1>&2
+ $echo "$modename: cannot determine name of library object from \`$srcfile'" 1>&2
exit 1
;;
esac
if test -z "$base_compile"; then
- echo "$progname: you must specify a compilation command" 1>&2
- echo "$help" 1>&2
+ $echo "$modename: you must specify a compilation command" 1>&2
+ $echo "$help" 1>&2
exit 1
fi
@@ -243,41 +317,48 @@ if test -z "$show_help"; then
# Only build a PIC object if we are building libtool libraries.
if test "$build_libtool_libs" = yes; then
+ # Without this assignment, base_compile gets emptied.
+ fbsd_hideous_sh_bug=$base_compile
+
# All platforms use -DPIC, to notify preprocessed assembler code.
$show "$base_compile$pic_flag -DPIC $srcfile"
- if $run eval "$base_compile$pic_flag -DPIC $srcfile"; then :
+ if $run eval "$base_compile\$pic_flag -DPIC \$srcfile"; then :
else
- test -n "$obj" && $run $rm $obj
- exit 1
+ test -n "$obj" && $run $rm $obj
+ exit 1
fi
# If we have no pic_flag, then copy the object into place and finish.
if test -z "$pic_flag"; then
- $show "$LN_S $obj $libobj"
- $run $LN_S $obj $libobj
- exit $?
+ $show "$LN_S $obj $libobj"
+ $run $LN_S $obj $libobj
+ exit $?
fi
# Just move the object, then go on to compile the next one
$show "$mv $obj $libobj"
$run $mv $obj $libobj || exit 1
+
+ # Allow error messages only from the first compilation.
+ suppress_output=' >/dev/null 2>&1'
fi
# Only build a position-dependent object if we build old libraries.
if test "$build_old_libs" = yes; then
- $show "$base_compile $srcfile"
- if $run eval "$base_compile $srcfile"; then :
+ # Suppress compiler output if we already did a PIC compilation.
+ $show "$base_compile $srcfile$suppress_output"
+ if $run eval "$base_compile \$srcfile$suppress_output"; then :
else
$run $rm $obj $libobj
exit 1
fi
fi
- # Create an invalid libtool object if no PIC, so that we don't accidentally
- # link it into a program.
+ # Create an invalid libtool object if no PIC, so that we do not
+ # accidentally link it into a program.
if test "$build_libtool_libs" != yes; then
$show "echo timestamp > $libobj"
- $run eval "echo timestamp > $libobj" || exit $?
+ $run eval "echo timestamp > \$libobj" || exit $?
fi
exit 0
@@ -285,26 +366,27 @@ if test -z "$show_help"; then
# libtool link mode
link)
- progname="$progname: link"
- # Go through the arguments, transforming them on the way.
- cc="$nonopt"
- args="$cc"
- allow_undefined=no
- compile_command="$cc"
- finalize_command="$cc"
+ modename="$modename: link"
+ CC="$nonopt"
+ allow_undefined=yes
+ compile_command="$CC"
+ finalize_command="$CC"
+
compile_shlibpath=
finalize_shlibpath=
deplibs=
+ dlfiles=
+ dlprefiles=
export_dynamic=no
hardcode_libdirs=
- install_libdir=
libobjs=
link_against_libtool_libs=
- link_static=
ltlibs=
objs=
prev=
prevarg=
+ release=
+ rpath=
perm_rpath=
temp_rpath=
vinfo=
@@ -313,294 +395,455 @@ if test -z "$show_help"; then
for arg
do
case "$arg" in
- -static)
+ -all-static | -static)
+ if test "X$arg" = "X-all-static" && test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+ $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+ fi
build_libtool_libs=no
- build_old_libs=yes
+ build_old_libs=yes
break
;;
esac
done
+ # See if our shared archives depend on static archives.
+ test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+ # Go through the arguments, transforming them on the way.
for arg
do
# If the previous option needs an argument, assign it.
if test -n "$prev"; then
- case "$prev" in
- output)
- compile_command="$compile_command @OUTPUT@"
- finalize_command="$finalize_command @OUTPUT@"
- args="$args $arg"
- ;;
- esac
-
- eval "$prev=\$arg"
- prev=
+ case "$prev" in
+ output)
+ compile_command="$compile_command @OUTPUT@"
+ finalize_command="$finalize_command @OUTPUT@"
+ ;;
+ esac
- continue
+ case "$prev" in
+ dlfiles|dlprefiles)
+ case "$arg" in
+ *.la | *.lo) ;; # We handle these cases below.
+ *)
+ dlprefiles="$dlprefiles $arg"
+ test "$prev" = dlfiles && dlfiles="$dlfiles $arg"
+ prev=
+ ;;
+ esac
+ ;;
+ release)
+ release="-$arg"
+ prev=
+ continue
+ ;;
+ rpath)
+ rpath="$rpath $arg"
+ prev=
+ continue
+ ;;
+ *)
+ eval "$prev=\"\$arg\""
+ prev=
+ continue
+ ;;
+ esac
fi
- args="$args $arg"
prevarg="$arg"
case "$arg" in
- -allow-undefined) allow_undefined=yes ;;
+ -all-static)
+ if test -n "$link_static_flag"; then
+ compile_command="$compile_command $link_static_flag"
+ finalize_command="$finalize_command $link_static_flag"
+ fi
+ continue
+ ;;
- -export-dynamic)
- export_dynamic=yes
- compile_command="$compile_command $export_dynamic_flag"
- finalize_command="$finalize_command $export_dynamic_flag"
+ -allow-undefined)
+ # FIXME: remove this flag sometime in the future.
+ $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
continue
;;
- -L*)
- dir=`echo "$arg" | sed 's%^-L\(.*\)$%\1%'`
- case "$dir" in
- /*)
- ;;
- *)
- echo "$progname: \`-L$dir' cannot specify a relative directory" 1>&2
- exit 1
- ;;
- esac
- deplibs="$deplibs $arg"
- ;;
+ -dlopen)
+ prev=dlfiles
+ continue
+ ;;
- -l*) deplibs="$deplibs $arg" ;;
+ -dlpreopen)
+ prev=dlprefiles
+ continue
+ ;;
- -o) prev=output ;;
+ -export-dynamic)
+ if test "$export_dynamic" != yes; then
+ export_dynamic=yes
+ if test -n "$export_dynamic_flag_spec"; then
+ eval arg=\"$export_dynamic_flag_spec\"
+ else
+ arg=
+ fi
- -rpath)
- prev=install_libdir
- continue
- ;;
+ # Add the symbol object into the linking commands.
+ compile_command="$compile_command @SYMFILE@"
+ finalize_command="$finalize_command @SYMFILE@"
+ fi
+ ;;
- -static)
- link_static="`eval echo \"$link_static_flag\"`"
- compile_command="$compile_command $link_static"
- continue
- ;;
+ -L*)
+ dir=`$echo "X$arg" | $Xsed -e 's%^-L\(.*\)$%\1%'`
+ case "$dir" in
+ /* | [A-Za-z]:\\*)
+ # Add the corresponding hardcode_libdir_flag, if it is not identical.
+ ;;
+ *)
+ $echo "$modename: \`-L$dir' cannot specify a relative directory" 1>&2
+ exit 1
+ ;;
+ esac
+ deplibs="$deplibs $arg"
+ ;;
- -version-file)
- echo "$progname: \`-version-file' has been replaced by \`-version-info'" 1>&2
- echo "$help" 1>&2
- exit 1
- ;;
+ -l*) deplibs="$deplibs $arg" ;;
- -version-info)
- prev=vinfo
+ -no-undefined)
+ allow_undefined=no
continue
;;
- -*) cc="$cc $arg" ;; # Some other compiler flag.
+ -o) prev=output ;;
- *.o)
- # A standard object.
- objs="$objs $arg"
+ -release)
+ prev=release
+ continue
;;
- *.a)
- # Find the relevant object directory and library name.
- file=`echo "$arg" | sed 's%^.*/%%'`
- dir=`echo "$arg" | sed 's%/[^/]*$%/%'`
- test "$dir" = "$arg" && dir=
+ -rpath)
+ prev=rpath
+ continue
+ ;;
- # Standard archive.
- objs="$objs $arg"
+ -static)
+ # If we have no pic_flag, then this is the same as -all-static.
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ compile_command="$compile_command $link_static_flag"
+ finalize_command="$finalize_command $link_static_flag"
+ fi
+ continue
;;
- *.lo)
- # A library object.
- libobjs="$libobjs $arg"
- ;;
+ -version-info)
+ prev=vinfo
+ continue
+ ;;
- *.la)
- # A libtool-controlled library.
+ # Some other compiler flag.
+ -* | +*)
+ # Unknown arguments in both finalize_command and compile_command need
+ # to be aesthetically quoted because they are evaled later.
+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+ case "$arg" in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ arg="\"$arg\""
+ ;;
+ esac
+ ;;
- libdir=
- library_names=
- old_library=
+ *.o | *.a)
+ # A standard object.
+ objs="$objs $arg"
+ ;;
- # Check to see that this really is a libtool archive.
- if egrep "^# Generated by $PROGRAM" $arg >/dev/null 2>&1; then :
- else
- echo "$progname: \`$arg' is not a valid libtool archive" 1>&2
- exit 1
+ *.lo)
+ # A library object.
+ if test "$prev" = dlfiles; then
+ dlfiles="$dlfiles $arg"
+ if test "$build_libtool_libs" = yes; then
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
fi
- # If there is no directory component, then add one.
- case "$arg" in
- */*) . $arg ;;
- *) . ./$arg ;;
- esac
-
- if test -z "$libdir"; then
- echo "$progname: \`$arg' contains no -rpath information" 1>&2
- exit 1
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+ dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e 's/\.lo$/\.o/'`
+ prev=
fi
+ libobjs="$libobjs $arg"
+ ;;
- # Get the name of the library we link against.
- linklib=
- for l in $old_library $library_names; do
- linklib="$l"
- done
+ *.la)
+ # A libtool-controlled library.
- if test -z "$linklib"; then
- echo "$progname: cannot find name of link library for \`$arg'" 1>&2
- exit 1
- fi
+ dlname=
+ libdir=
+ library_names=
+ old_library=
- # Find the relevant object directory and library name.
- name=`echo "$arg" | sed 's%^.*/%%; s/\.la$//; s/^lib//'`
- dir=`echo "$arg" | sed 's%/[^/]*$%%'`
- if test "$dir" = "$arg"; then
- dir="$objdir"
- else
- dir="$dir/$objdir"
- fi
+ # Check to see that this really is a libtool archive.
+ if (sed -e '2q' $arg | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then :
+ else
+ $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2
+ exit 1
+ fi
- if test "$build_libtool_libs" = yes && test -n "$library_names"; then
- link_against_libtool_libs="$link_against_libtool_libs $arg"
- if test -n "$shlibpath_var"; then
- # Make sure the rpath contains only unique directories.
- case "$temp_rpath " in
- "* $dir *") ;;
- *) temp_rpath="$temp_rpath $dir" ;;
- esac
- fi
+ # If there is no directory component, then add one.
+ case "$arg" in
+ */* | *\\*) . $arg ;;
+ *) . ./$arg ;;
+ esac
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- # Put the magic libdir with the hardcode flag.
- hardcode_libdirs="$libdir"
- libdir="@HARDCODE_LIBDIRS@"
- else
- # Just accumulate the libdirs.
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
- libdir=
- fi
- fi
+ if test -z "$libdir"; then
+ $echo "$modename: \`$arg' contains no -rpath information" 1>&2
+ exit 1
+ fi
- if test -n "$libdir"; then
- hardcode_libdir_flag=`eval echo \"$hardcode_libdir_flag_spec\"`
- compile_command="$compile_command $hardcode_libdir_flag"
- finalize_command="$finalize_command $hardcode_libdir_flag"
- fi
- elif test "$hardcode_runpath_var" = yes; then
- # Do the same for the permanent run path.
- case "$perm_rpath " in
- "* $libdir *") ;;
- *) perm_rpath="$perm_rpath $libdir" ;;
- esac
- fi
+ # Get the name of the library we link against.
+ linklib=
+ for l in $old_library $library_names; do
+ linklib="$l"
+ done
+ if test -z "$linklib"; then
+ $echo "$modename: cannot find name of link library for \`$arg'" 1>&2
+ exit 1
+ fi
- case "$hardcode_action" in
- immediate)
- if test "$hardcode_direct" = no; then
- compile_command="$compile_command $dir/$linklib"
- elif test "$hardcode_minus_L" = no; then
- compile_command="$compile_command -L$dir -l$name"
- elif test "$hardcode_shlibpath_var" = no; then
- compile_shlibpath="$compile_shlibpath$dir:"
- compile_command="$compile_command -l$name"
- fi
- ;;
+ # Find the relevant object directory and library name.
+ name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'`
+ dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$dir" = "X$arg"; then
+ dir="$objdir"
+ else
+ dir="$dir/$objdir"
+ fi
- relink)
- # We need an absolute path.
- case "$dir" in
- /*) ;;
- *)
- absdir=`cd "$dir" && pwd`
- if test -z "$absdir"; then
- echo "$progname: cannot determine absolute directory name of \`$dir'" 1>&2
- exit 1
- fi
- dir="$absdir"
- ;;
- esac
-
- if test "$hardcode_direct" = yes; then
- compile_command="$compile_command $dir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- compile_command="$compile_command -L$dir -l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- compile_shlibpath="$compile_shlibpath$dir:"
- compile_command="$compile_command -l$name"
- fi
- ;;
+ # This library was specified with -dlopen.
+ if test "$prev" = dlfiles; then
+ dlfiles="$dlfiles $arg"
+ if test -z "$dlname"; then
+ # If there is no dlname, we need to preload.
+ prev=dlprefiles
+ else
+ # We should not create a dependency on this library, but we
+ # may need any libraries it requires.
+ compile_command="$compile_command$dependency_libs"
+ finalize_command="$finalize_command$dependency_libs"
+ prev=
+ continue
+ fi
+ fi
- *)
- echo "$progname: \`$hardcode_action' is an unknown hardcode action" 1>&2
- exit 1
- ;;
- esac
+ # The library was specified with -dlpreopen.
+ if test "$prev" = dlprefiles; then
+ # Prefer using a static library (so that no silly _DYNAMIC symbols
+ # are required to link).
+ if test -n "$old_library"; then
+ dlprefiles="$dlprefiles $dir/$old_library"
+ else
+ dlprefiles="$dlprefiles $dir/$linklib"
+ fi
+ prev=
+ fi
- # Finalize command for both is simple: just hardcode it.
- if test "$hardcode_direct" = yes; then
- finalize_command="$finalize_command $libdir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- finalize_command="$finalize_command -L$libdir -l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- finalize_shlibpath="$finalize_shlibpath$libdir:"
- finalize_command="$finalize_command -l$name"
+ if test "$build_libtool_libs" = yes && test -n "$library_names"; then
+ link_against_libtool_libs="$link_against_libtool_libs $arg"
+ if test -n "$shlibpath_var"; then
+ # Make sure the rpath contains only unique directories.
+ case "$temp_rpath " in
+ *" $dir "*) ;;
+ *) temp_rpath="$temp_rpath $dir" ;;
+ esac
+ fi
+
+ # This is the magic to use -rpath.
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ # Put the magic libdir with the hardcode flag.
+ hardcode_libdirs="$libdir"
+ libdir="@HARDCODE_LIBDIRS@"
+ else
+ # Just accumulate the unique libdirs.
+ case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ libdir=
+ fi
+ fi
+
+ if test -n "$libdir"; then
+ eval flag=\"$hardcode_libdir_flag_spec\"
+
+ compile_command="$compile_command $flag"
+ finalize_command="$finalize_command $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ # Do the same for the permanent run path.
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) perm_rpath="$perm_rpath $libdir" ;;
+ esac
+ fi
+
+
+ case "$hardcode_action" in
+ immediate)
+ if test "$hardcode_direct" = no; then
+ compile_command="$compile_command $dir/$linklib"
+ elif test "$hardcode_minus_L" = no; then
+ compile_command="$compile_command -L$dir -l$name"
+ elif test "$hardcode_shlibpath_var" = no; then
+ compile_shlibpath="$compile_shlibpath$dir:"
+ compile_command="$compile_command -l$name"
+ fi
+ ;;
+
+ relink)
+ # We need an absolute path.
+ case "$dir" in
+ /* | [A-Za-z]:\\*) ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ if test -z "$absdir"; then
+ $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
+ exit 1
+ fi
+ dir="$absdir"
+ ;;
+ esac
+
+ if test "$hardcode_direct" = yes; then
+ compile_command="$compile_command $dir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ compile_command="$compile_command -L$dir -l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ compile_shlibpath="$compile_shlibpath$dir:"
+ compile_command="$compile_command -l$name"
+ fi
+ ;;
+
+ *)
+ $echo "$modename: \`$hardcode_action' is an unknown hardcode action" 1>&2
+ exit 1
+ ;;
+ esac
+
+ # Finalize command for both is simple: just hardcode it.
+ if test "$hardcode_direct" = yes; then
+ finalize_command="$finalize_command $libdir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ finalize_command="$finalize_command -L$libdir -l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ finalize_shlibpath="$finalize_shlibpath$libdir:"
+ finalize_command="$finalize_command -l$name"
else
- # We can't seem to hardcode it, guess we'll fake it.
- finalize_command="$finalize_command -L$libdir -l$name"
- fi
+ # We cannot seem to hardcode it, guess we'll fake it.
+ finalize_command="$finalize_command -L$libdir -l$name"
+ fi
else
# Transform directly to old archives if we don't build new libraries.
if test -n "$pic_flag" && test -z "$old_library"; then
- echo "$progname: cannot find static library for \`$arg'" 1>&2
- exit 1
+ $echo "$modename: cannot find static library for \`$arg'" 1>&2
+ exit 1
+ fi
+
+ # Here we assume that one of hardcode_direct or hardcode_minus_L
+ # is not unsupported. This is valid on all known static and
+ # shared platforms.
+ if test "$hardcode_direct" != unsupported; then
+ test -n "$old_library" && linklib="$old_library"
+ compile_command="$compile_command $dir/$linklib"
+ finalize_command="$finalize_command $dir/$linklib"
+ else
+ compile_command="$compile_command -L$dir -l$name"
+ finalize_command="$finalize_command -L$dir -l$name"
fi
- test -n "$old_library" && linklib="$old_library"
- compile_command="$compile_command $dir/$linklib"
- finalize_command="$finalize_command $dir/$linklib"
fi
+
+ # Add in any libraries that this one depends upon.
+ compile_command="$compile_command$dependency_libs"
+ finalize_command="$finalize_command$dependency_libs"
continue
- ;;
+ ;;
+ # Some other compiler argument.
*)
- echo "$progname: unknown file suffix for \`$arg'" 1>&2
- echo "$help" 1>&2
- exit 1
- ;;
+ # Unknown arguments in both finalize_command and compile_command need
+ # to be aesthetically quoted because they are evaled later.
+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+ case "$arg" in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ arg="\"$arg\""
+ ;;
+ esac
+ ;;
esac
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
+ # Now actually substitute the argument into the commands.
+ if test -n "$arg"; then
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ fi
done
if test -n "$prev"; then
- echo "$progname: the \`$prevarg' option requires an argument" 1>&2
- echo "$help" 1>&2
+ $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+ $echo "$help" 1>&2
exit 1
fi
- # Substitute the hardcoded libdirs into the compile commands.
- if test "$hardcode_libdir_colon_separated" = yes; then
- compile_command=`echo "$compile_command" | sed "s%@HARDCODE_LIBDIRS@%$hardcode_libdirs%g"`
- finalize_command=`echo "$finalize_command" | sed "s%@HARDCODE_LIBDIRS@%$hardcode_libdirs%g"`
+ if test -n "$vinfo" && test -n "$release"; then
+ $echo "$modename: you cannot specify both \`-version-info' and \`-release'" 1>&2
+ $echo "$help" 1>&2
+ exit 1
fi
oldlib=
oldobjs=
case "$output" in
"")
- echo "$progname: you must specify an output file" 1>&2
- echo "$help" 1>&2
+ $echo "$modename: you must specify an output file" 1>&2
+ $echo "$help" 1>&2
exit 1
;;
- */*)
- echo "$progname: output file \`$output' must have no directory components" 1>&2
+ */* | *\\*)
+ $echo "$modename: output file \`$output' must have no directory components" 1>&2
exit 1
;;
+ *.a)
+ # Now set the variables for building old libraries.
+ build_libtool_libs=no
+ build_old_libs=yes
+ oldlib="$output"
+ $show "$rm $oldlib"
+ $run $rm $oldlib
+ ;;
+
*.la)
- libname=`echo "$output" | sed 's/\.la$//'`
+ # Make sure we only generate libraries of the form `libNAME.la'.
+ case "$output" in
+ lib*) ;;
+ *)
+ $echo "$modename: libtool library \`$arg' must begin with \`lib'" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ ;;
+ esac
+
+ name=`$echo "X$output" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+ eval libname=\"$libname_spec\"
# All the library-specific variables (install_libdir is set above).
library_names=
@@ -611,225 +854,316 @@ if test -z "$show_help"; then
age=0
if test -n "$objs"; then
- echo "$progname: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1
- exit 1
+ $echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1
+ exit 1
fi
# How the heck are we supposed to write a wrapper for a shared library?
if test -n "$link_against_libtool_libs"; then
- echo "$progname: libtool library \`$output' may not depend on uninstalled libraries:$link_against_libtool_libs" 1>&2
- exit 1
+ $echo "$modename: libtool library \`$output' may not depend on uninstalled libraries:$link_against_libtool_libs" 1>&2
+ exit 1
fi
- if test -z "$install_libdir"; then
- echo "$progname: you must specify an installation directory with \`-rpath'" 1>&2
- exit 1
+ if test -n "$dlfiles$dlprefiles"; then
+ $echo "$modename: warning: \`-dlopen' is ignored while creating libtool libraries" 1>&2
+ # Nullify the symbol file.
+ compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
fi
- # Parse the version information argument.
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=':'
- set dummy $vinfo
- IFS="$save_ifs"
+ if test -z "$rpath"; then
+ $echo "$modename: you must specify an installation directory with \`-rpath'" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
- if test -n "$5"; then
- echo "$progname: too many parameters to \`-version-info'" 1>&2
- echo "$help" 1>&2
- exit 1
+ set dummy $rpath
+ if test $# -gt 2; then
+ $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
fi
+ install_libdir="$2"
- test -n "$2" && current="$2"
- test -n "$3" && revision="$3"
- test -n "$4" && age="$4"
+ if test -n "$vinfo"; then
- # Check that each of the things are valid numbers.
- case "$current" in
- 0 | [1-9] | [1-9][0-9]*) ;;
- *)
- echo "$progname: CURRENT \`$current' is not a nonnegative integer" 1>&2
- echo "$progname: \`$vinfo' is not valid version information" 1>&2
- exit 1
- ;;
- esac
+ # Parse the version information argument.
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS=':'
+ set dummy $vinfo
+ IFS="$save_ifs"
- case "$revision" in
- 0 | [1-9] | [1-9][0-9]*) ;;
- *)
- echo "$progname: REVISION \`$revision' is not a nonnegative integer" 1>&2
- echo "$progname: \`$vinfo' is not valid version information" 1>&2
- exit 1
- ;;
- esac
+ if test -n "$5"; then
+ $echo "$modename: too many parameters to \`-version-info'" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
- case "$age" in
- 0 | [1-9] | [1-9][0-9]*) ;;
- *)
- echo "$progname: AGE \`$age' is not a nonnegative integer" 1>&2
- echo "$progname: \`$vinfo' is not valid version information" 1>&2
- exit 1
- ;;
- esac
+ test -n "$2" && current="$2"
+ test -n "$3" && revision="$3"
+ test -n "$4" && age="$4"
- if test $age -gt $current; then
- echo "$progname: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
- echo "$progname: \`$vinfo' is not valid version information" 1>&2
- exit 1
- fi
+ # Check that each of the things are valid numbers.
+ case "$current" in
+ 0 | [1-9] | [1-9][0-9]*) ;;
+ *)
+ $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+ exit 1
+ ;;
+ esac
- # Calculate the version variables.
- version_vars="version_type current age revision"
- case "$version_type" in
- none) ;;
+ case "$revision" in
+ 0 | [1-9] | [1-9][0-9]*) ;;
+ *)
+ $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+ exit 1
+ ;;
+ esac
- linux)
- version_vars="$version_vars major versuffix"
- major=`expr $current - $age`
- versuffix="$major.$age.$revision"
- ;;
+ case "$age" in
+ 0 | [1-9] | [1-9][0-9]*) ;;
+ *)
+ $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+ exit 1
+ ;;
+ esac
- osf)
- version_vars="$version_vars versuffix verstring"
- major=`expr $current - $age`
- versuffix="$current.$age.$revision"
- verstring="$versuffix"
-
- # Add in all the interfaces that we are compatible with.
- loop=$age
- while test $loop != 0; do
- iface=`expr $current - $loop`
- loop=`expr $loop - 1`
- verstring="$verstring:${iface}.0"
- done
+ if test $age -gt $current; then
+ $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+ exit 1
+ fi
- # Make executables depend on our current version.
- verstring="$verstring:${current}.0"
- ;;
+ # Calculate the version variables.
+ version_vars="version_type current age revision"
+ case "$version_type" in
+ none) ;;
- sunos)
- version_vars="$version_vars major versuffix"
- major="$current"
- versuffix="$current.$revision"
- ;;
+ linux)
+ version_vars="$version_vars major versuffix"
+ major=.`expr $current - $age`
+ versuffix=".$major.$age.$revision"
+ ;;
- *)
- echo "$progname: unknown library version type \`$version_type'" 1>&2
- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit 1
- ;;
- esac
+ osf)
+ version_vars="$version_vars versuffix verstring"
+ major=.`expr $current - $age`
+ versuffix=."$current.$age.$revision"
+ verstring="$current.$age.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$age
+ while test $loop != 0; do
+ iface=`expr $current - $loop`
+ loop=`expr $loop - 1`
+ verstring="$verstring:${iface}.0"
+ done
+
+ # Make executables depend on our current version.
+ verstring="$verstring:${current}.0"
+ ;;
+
+ sunos)
+ version_vars="$version_vars major versuffix"
+ major=."$current"
+ versuffix=."$current.$revision"
+ ;;
+
+ windows)
+ # Like Linux, but with '-' rather than '.', since we only
+ # want one extension on Windows 95.
+ version_vars="$version_vars major versuffix"
+ major=`expr $current - $age`
+ versuffix="-$major-$age-$revision"
+ ;;
+
+ *)
+ $echo "$modename: unknown library version type \`$version_type'" 1>&2
+ echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
+ exit 1
+ ;;
+ esac
+ else
+
+ # No version information.
+ version_vars=
+
+ case "$version_type" in
+ none) ;;
+
+ linux)
+ version_vars="$version_vars versuffix major"
+ major=
+ versuffix=
+ ;;
+
+ osf)
+ version_vars="$version_vars versuffix verstring"
+ major=
+ versuffix=
+ verstring=":0.0"
+ ;;
+
+ sunos)
+ version_vars="$version_vars major versuffix"
+ major=
+ versuffix=
+ ;;
+
+ windows)
+ # Like Linux, but with '-' rather than '.', and with a leading
+ # '-', since we only want one extension on Windows 95.
+ version_vars="$version_vars major versuffix"
+ major=
+ versuffix=
+ ;;
+
+ *)
+ $echo "$modename: unknown library version type \`$version_type'" 1>&2
+ echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
+ exit 1
+ ;;
+ esac
+ fi
# Create the output directory, or remove our outputs if we need to.
if test -d $objdir; then
- $show "$rm $objdir/$libname.*"
- $run $rm $objdir/$libname.*
+ $show "$rm $objdir/$output $objdir/$libname.* $objdir/${libname}${release}.*"
+ $run $rm $objdir/$output $objdir/$libname.* $objdir/${libname}${release}.*
else
$show "$mkdir $objdir"
- $run $mkdir $objdir || exit $?
+ $run $mkdir $objdir
+ status=$?
+ if test $status -eq 0 || test -d $objdir; then :
+ else
+ exit $status
+ fi
fi
# Check to see if the archive will have undefined symbols.
if test "$allow_undefined" = yes; then
- if test "$allow_undefined_flag" = unsupported; then
- echo "$progname: warning: undefined symbols not allowed in $host shared libraries" 1>&2
- build_libtool_libs=no
- fi
+ if test "$allow_undefined_flag" = unsupported; then
+ $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+ build_libtool_libs=no
+ build_old_libs=yes
+ fi
else
- # Clear the flag.
- allow_undefined_flag=
+ # Don't allow undefined symbols.
+ allow_undefined_flag="$no_undefined_flag"
fi
+ # Add libc to deplibs on all systems.
+ dependency_libs="$deplibs"
+ deplibs="$deplibs -lc"
+
if test "$build_libtool_libs" = yes; then
- # Get the real and link names of the library.
- library_names=`eval echo \"$library_names_spec\"`
- set dummy $library_names
- realname="$2"
- shift; shift
-
- if test -n "$soname_spec"; then
- soname=`eval echo \"$soname_spec\"`
- else
- soname="$realname"
- fi
+ # Get the real and link names of the library.
+ eval library_names=\"$library_names_spec\"
+ set dummy $library_names
+ realname="$2"
+ shift; shift
+
+ if test -n "$soname_spec"; then
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
- lib="$objdir/$realname"
- linknames=
+ lib="$objdir/$realname"
for link
do
linknames="$linknames $link"
done
- # Use standard objects if they are PIC.
- test -z "$pic_flag" && libobjs=`echo "$libobjs " | sed 's/\.lo /.o /g; s/ $//g'`
+ # Use standard objects if they are PIC.
+ test -z "$pic_flag" && libobjs=`$echo "X$libobjs " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//g'`
- # Do each of the archive commands.
- cmds=`eval echo \"$archive_cmds\"`
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
+ # Do each of the archive commands.
+ eval cmds=\"$archive_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
- # Create links to the real library.
- for link in $linknames; do
- $show "(cd $objdir && $LN_S $realname $link)"
- $run eval "(cd $objdir && $LN_S $realname $link)" || exit $?
- done
+ # Create links to the real library.
+ for linkname in $linknames; do
+ if test "$realname" != "$linkname"; then
+ $show "(cd $objdir && $LN_S $realname $linkname)"
+ $run eval '(cd $objdir && $LN_S $realname $linkname)' || exit $?
+ fi
+ done
- # If -export-dynamic was specified, set the dlname.
- if test "$export_dynamic" = yes; then
- # On all known operating systems, these are identical.
- dlname="$soname"
- fi
+ # If -export-dynamic was specified, set the dlname.
+ if test "$export_dynamic" = yes; then
+ # On all known operating systems, these are identical.
+ dlname="$soname"
+ fi
fi
+
+ # Now set the variables for building old libraries.
+ oldlib="$objdir/$libname.a"
;;
*.lo | *.o)
if test -n "$link_against_libtool_libs"; then
- echo "$progname: error: cannot link libtool libraries into reloadable objects" 1>&2
- exit 1
+ $echo "$modename: error: cannot link libtool libraries into reloadable objects" 1>&2
+ exit 1
fi
if test -n "$deplibs"; then
- echo "$progname: warning: \`-l' and \`-L' are ignored while creating objects" 1>&2
+ $echo "$modename: warning: \`-l' and \`-L' are ignored while creating objects" 1>&2
fi
- if test -n "$install_libdir"; then
- echo "$progname: warning: \`-rpath' is ignored while creating objects" 1>&2
+ if test -n "$dlfiles$dlprefiles"; then
+ $echo "$modename: warning: \`-dlopen' is ignored while creating objects" 1>&2
+ # Nullify the symbol file.
+ compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+ fi
+
+ if test -n "$rpath"; then
+ $echo "$modename: warning: \`-rpath' is ignored while creating objects" 1>&2
fi
if test -n "$vinfo"; then
- echo "$progname: warning: \`-version-info' is ignored while creating objects" 1>&2
+ $echo "$modename: warning: \`-version-info' is ignored while creating objects" 1>&2
+ fi
+
+ if test -n "$release"; then
+ $echo "$modename: warning: \`-release' is ignored while creating objects" 1>&2
fi
case "$output" in
*.lo)
- if test -n "$objs"; then
- echo "$progname: cannot build library object \`$output' from non-libtool objects" 1>&2
- exit 1
- fi
- libobj="$output"
- obj=`echo "$output" | sed 's/\.lo$/.o/'`
- ;;
+ if test -n "$objs"; then
+ $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
+ exit 1
+ fi
+ libobj="$output"
+ obj=`$echo "X$output" | $Xsed -e 's/\.lo$/.o/'`
+ ;;
*)
libobj=
- obj="$output"
- ;;
+ obj="$output"
+ ;;
esac
# Delete the old objects.
$run $rm $obj $libobj
# Create the old-style object.
- reload_objs="$objs"`echo "$libobjs " | sed 's/[^ ]*\.a //g; s/\.lo /.o /g; s/ $//g'`
+ reload_objs="$objs"`$echo "X$libobjs " | $Xsed -e 's/[^ ]*\.a //g' -e 's/\.lo /.o /g' -e 's/ $//g'`
output="$obj"
- cmds=`eval echo \"$reload_cmds\"`
+ eval cmds=\"$reload_cmds\"
IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
for cmd in $cmds; do
IFS="$save_ifs"
$show "$cmd"
- $run eval "$cmd" || exit $?
+ $run eval "$cmd" || exit $?
done
IFS="$save_ifs"
@@ -839,16 +1173,16 @@ if test -z "$show_help"; then
if test "$build_libtool_libs" != yes; then
# Create an invalid libtool object if no PIC, so that we don't
# accidentally link it into a program.
- $show "echo timestamp > $libobj"
- $run eval "echo timestamp > $libobj" || exit $?
- exit 0
+ $show "echo timestamp > $libobj"
+ $run eval "echo timestamp > $libobj" || exit $?
+ exit 0
fi
if test -n "$pic_flag"; then
- # Only do commands if we really have different PIC objects.
- reload_objs="$libobjs"
- output="$libobj"
- cmds=`eval echo \"$reload_cmds\"`
+ # Only do commands if we really have different PIC objects.
+ reload_objs="$libobjs"
+ output="$libobj"
+ eval cmds=\"$reload_cmds\"
IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
for cmd in $cmds; do
IFS="$save_ifs"
@@ -866,114 +1200,294 @@ if test -z "$show_help"; then
;;
*)
- if test -n "$install_libdir"; then
- echo "$progname: warning: \`-rpath' is ignored while linking programs" 1>&2
+ if test -n "$vinfo"; then
+ $echo "$modename: warning: \`-version-info' is ignored while linking programs" 1>&2
fi
- if test -n "$vinfo"; then
- echo "$progname: warning: \`-version-info' is ignored while linking programs" 1>&2
+ if test -n "$release"; then
+ $echo "$modename: warning: \`-release' is ignored while creating objects" 1>&2
fi
- if test -n "$libobjs"; then
- # Transform all the library objects into standard objects.
- compile_command=`echo "$compile_command " | sed 's/\.lo /.o /g; s/ $//'`
- finalize_command=`echo "$finalize_command " | sed 's/\.lo /.o /g; s/ $//'`
+ if test -n "$rpath"; then
+ # If the user specified any rpath flags, then add them.
+ for libdir in $rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ # Put the magic libdir with the hardcode flag.
+ hardcode_libdirs="$libdir"
+ libdir="@HARDCODE_LIBDIRS@"
+ else
+ # Just accumulate the unique libdirs.
+ case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ libdir=
+ fi
+ fi
+
+ if test -n "$libdir"; then
+ eval flag=\"$hardcode_libdir_flag_spec\"
+
+ compile_command="$compile_command $flag"
+ finalize_command="$finalize_command $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) perm_rpath="$perm_rpath $libdir" ;;
+ esac
+ fi
+ done
fi
- if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then
- # Replace the output file specification.
- compile_command=`echo "$compile_command" | sed 's%@OUTPUT@%'"$output"'%g'`
- finalize_command=`echo "$finalize_command" | sed 's%@OUTPUT@%'"$output"'%g'`
+ # Substitute the hardcoded libdirs into the compile commands.
+ if test -n "$hardcode_libdir_separator"; then
+ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@HARDCODE_LIBDIRS@%$hardcode_libdirs%g"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@HARDCODE_LIBDIRS@%$hardcode_libdirs%g"`
+ fi
- # We have no uninstalled library dependencies, so finalize right now.
- $show "$compile_command"
- $run $compile_command
- status=$?
+ if test -n "$libobjs" && test "$build_old_libs" = yes; then
+ # Transform all the library objects into standard objects.
+ compile_command=`$echo "X$compile_command " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//'`
+ finalize_command=`$echo "X$finalize_command " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//'`
+ fi
+
+ if test "$export_dynamic" = yes && test -n "$NM" && test -n "$global_symbol_pipe"; then
+ dlsyms="${output}S.c"
+ else
+ dlsyms=
+ fi
+
+ if test -n "$dlsyms"; then
+ # Add our own program objects to the preloaded list.
+ dlprefiles=`$echo "X$objs$dlprefiles " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//'`
+
+ # Discover the nlist of each of the dlfiles.
+ nlist="$objdir/${output}.nm"
- # If we failed to link statically, then try again.
- if test $status -ne 0 && test -n "$link_static"; then
- echo "$progname: cannot link \`$output' statically; retrying semi-dynamically" 1>&2
- compile_command=`echo "$compile_command " | sed "s% $link_static % %;s/ $//"`
- $show "$finalize_command"
- $run $finalize_command
+ if test -d $objdir; then
+ $show "$rm $nlist ${nlist}T"
+ $run $rm "$nlist" "${nlist}T"
+ else
+ $show "$mkdir $objdir"
+ $run $mkdir $objdir
status=$?
+ if test $status -eq 0 || test -d $objdir; then :
+ else
+ exit $status
+ fi
fi
- exit $status
+
+ for arg in $dlprefiles; do
+ $show "extracting global C symbols from \`$arg'"
+ $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+ done
+
+ # Parse the name list into a source file.
+ $show "creating $objdir/$dlsyms"
+ if test -z "$run"; then
+ # Make sure we at least have an empty file.
+ test -f "$nlist" || : > "$nlist"
+
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ wcout=`wc "$nlist" 2>/dev/null`
+ count=`echo "X$wcout" | $Xsed -e 's/^[ ]*\([0-9][0-9]*\).*$/\1/'`
+ (test "$count" -ge 0) 2>/dev/null || count=-1
+ else
+ $rm "$nlist"T
+ count=-1
+ fi
+
+ case "$dlsyms" in
+ "") ;;
+ *.c)
+ $echo > "$objdir/$dlsyms" "\
+/* $dlsyms - symbol resolution table for \`$output' dlsym emulation. */
+/* Generated by $PROGRAM - GNU $PACKAGE $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+/* Prevent the only kind of declaration conflicts we can make. */
+#define dld_preloaded_symbol_count some_other_symbol
+#define dld_preloaded_symbols some_other_symbol
+
+/* External symbol declarations for the compiler. */\
+"
+
+ if test -f "$nlist"; then
+ sed -e 's/^.* \(.*\)$/extern char \1;/' < "$nlist" >> "$objdir/$dlsyms"
+ else
+ echo '/* NONE */' >> "$objdir/$dlsyms"
+ fi
+
+ $echo >> "$objdir/$dlsyms" "\
+
+#undef dld_preloaded_symbol_count
+#undef dld_preloaded_symbols
+
+#if defined (__STDC__) && __STDC__
+# define __ptr_t void *
+#else
+# define __ptr_t char *
+#endif
+
+/* The number of symbols in dld_preloaded_symbols, -1 if unsorted. */
+int dld_preloaded_symbol_count = $count;
+
+/* The mapping between symbol names and symbols. */
+struct {
+ char *name;
+ __ptr_t address;
+}
+dld_preloaded_symbols[] =
+{\
+"
+
+ if test -f "$nlist"; then
+ sed 's/^\(.*\) \(.*\)$/ {"\1", (__ptr_t) \&\2},/' < "$nlist" >> "$objdir/$dlsyms"
+ fi
+
+ $echo >> "$objdir/$dlsyms" "\
+ {0, (__ptr_t) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif\
+"
+ ;;
+
+ *)
+ $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
+ exit 1
+ ;;
+ esac
+ fi
+
+ # Now compile the dynamic symbol file.
+ $show "(cd $objdir && $CC -c$no_builtin_flag \"$dlsyms\")"
+ $run eval '(cd $objdir && $CC -c$no_builtin_flag "$dlsyms")' || exit $?
+
+ # Transform the symbol file into the correct name.
+ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.o%"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.o%"`
+ elif test "$export_dynamic" != yes; then
+ test -n "$dlfiles$dlprefiles" && $echo "$modename: warning: \`-dlopen' and \`-dlpreopen' are ignored without \`-export-dynamic'" 1>&2
+ else
+ # We keep going just in case the user didn't refer to
+ # dld_preloaded_symbols. The linker will fail if global_symbol_pipe
+ # really was required.
+ $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
+
+ # Nullify the symbol file.
+ compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+ fi
+
+ if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then
+ # Replace the output file specification.
+ compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+
+ # We have no uninstalled library dependencies, so finalize right now.
+ $show "$compile_command"
+ $run eval "$compile_command"
+ exit $?
fi
# Replace the output file specification.
- compile_command=`echo "$compile_command" | sed 's%@OUTPUT@%'"$objdir/$output"'%g'`
- finalize_command=`echo "$finalize_command" | sed 's%@OUTPUT@%'"$objdir/$output"'T%g'`
+ compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$objdir/$output"'%g'`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e 's%@OUTPUT@%'"$objdir/$output"'T%g'`
# Create the binary in the object directory, then wrap it.
if test -d $objdir; then :
else
$show "$mkdir $objdir"
- $run $mkdir $objdir || exit $?
+ $run $mkdir $objdir
+ status=$?
+ if test $status -eq 0 || test -d $objdir; then :
+ else
+ exit $status
+ fi
fi
if test -n "$shlibpath_var"; then
# We should set the shlibpath_var
- rpath=
- for dir in $temp_rpath; do
- case "$dir" in
- /*)
- # Absolute path.
- rpath="$rpath$dir:"
- ;;
- *)
- # Relative path: add a thisdir entry.
- rpath="$rpath\$thisdir/$dir:"
- ;;
- esac
- done
- temp_rpath="$rpath"
+ rpath=
+ for dir in $temp_rpath; do
+ case "$dir" in
+ /* | [A-Za-z]:\\*)
+ # Absolute path.
+ rpath="$rpath$dir:"
+ ;;
+ *)
+ # Relative path: add a thisdir entry.
+ rpath="$rpath\$thisdir/$dir:"
+ ;;
+ esac
+ done
+ temp_rpath="$rpath"
fi
# Delete the old output file.
$run $rm $output
if test -n "$compile_shlibpath"; then
- compile_command="$shlibpath_var=\"$compile_shlibpath\$$shlibpath_var\" $compile_command"
+ compile_command="$shlibpath_var=\"$compile_shlibpath\$$shlibpath_var\" $compile_command"
fi
if test -n "$finalize_shlibpath"; then
- finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
fi
- if test -n "$perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $perm_rpath; do
- rpath="$rpath$dir:"
- done
- compile_command="$runpath_var=\"$rpath\$$runpath_var\" $compile_command"
- finalize_command="$runpath_var=\"$rpath\$$runpath_var\" $finalize_command"
+ if test -n "$runpath_var" && test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ rpath="$rpath$dir:"
+ done
+ compile_command="$runpath_var=\"$rpath\$$runpath_var\" $compile_command"
+ finalize_command="$runpath_var=\"$rpath\$$runpath_var\" $finalize_command"
fi
case "$hardcode_action" in
relink)
- # AGH! Flame the AIX and HP-UX people for me, will ya?
- echo "$progname: warning: using a buggy system linker" 1>&2
- echo "$progname: relinking will be required before \`$output' can be installed" 1>&2
- ;;
+ # AGH! Flame the AIX and HP-UX people for me, will ya?
+ $echo "$modename: warning: using a buggy system linker" 1>&2
+ $echo "$modename: relinking will be required before \`$output' can be installed" 1>&2
+ ;;
esac
$show "$compile_command"
$run eval "$compile_command" || exit $?
# Now create the wrapper script.
- echo "creating $output"
+ $show "creating $output"
+
+ # Quote the finalize command for shipping.
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "$sed_quote_subst"`
+
+ # Quote $echo for shipping.
+ qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
# Only actually do things if our run command is non-null.
if test -z "$run"; then
- $rm $output
- trap "$rm $output; exit 1" 1 2 15
+ $rm $output
+ trap "$rm $output; exit 1" 1 2 15
- cat > $output <<EOF
+ $echo > $output "\
#! /bin/sh
# $output - temporary wrapper script for $objdir/$output
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION
+# Generated by ltmain.sh - GNU $PACKAGE $VERSION
#
# The $output program cannot be directly executed until all the libtool
# libraries that it depends on are installed.
@@ -981,96 +1495,117 @@ if test -z "$show_help"; then
# This wrapper script should never be moved out of \``pwd`'.
# If it is, it will not operate correctly.
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e s/^X//'
+sed_quote_subst='$sed_quote_subst'
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test \"\${CDPATH+set}\" = set; then CDPATH=; export CDPATH; fi
+
# This environment variable determines our operation mode.
-if test "\$libtool_install_magic" = "$magic"; then
+if test \"\$libtool_install_magic\" = \"$magic\"; then
# install mode needs the following variables:
link_against_libtool_libs='$link_against_libtool_libs'
- finalize_command='$finalize_command'
+ finalize_command=\"$finalize_command\"
else
- # Find the directory that this script lives in.
- thisdir=\`echo \$0 | sed 's%/[^/]*$%%'\`
- test "x\$thisdir" = "x\$0" && thisdir=.
+ # When we are sourced in execute mode, \$file and \$echo are already set.
+ if test \"\$libtool_execute_magic\" = \"$magic\"; then :
+ else
+ echo=\"$qecho\"
+ file=\"\$0\"
+ fi\
+"
+ $echo >> $output "\
- # Try to get the absolute directory name.
- absdir=\`cd "\$thisdir" && pwd\`
- test -n "\$absdir" && thisdir="\$absdir"
+ # Find the directory that this script lives in.
+ thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+ test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+ # Follow symbolic links until we get to the real thisdir.
+ file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
+ while test -n \"\$file\"; do
+ destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+
+ # If there was a directory component, then change thisdir.
+ if test \"x\$destdir\" != \"x\$file\"; then
+ case \"\$destdir\" in
+ /* | [A-Za-z]:\\*) thisdir=\"\$destdir\" ;;
+ *) thisdir=\"\$thisdir/\$destdir\" ;;
+ esac
+ fi
- progdir="\$thisdir/$objdir"
- program="$output"
+ file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+ file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
+ done
- if test -f "\$progdir/\$program"; then
- # Run the actual program with our arguments.
- args=
- for arg
- do
- # Quote arguments (to preserve shell metacharacters).
- args="\$args '\$arg'"
- done
+ # Try to get the absolute directory name.
+ absdir=\`cd \"\$thisdir\" && pwd\`
+ test -n \"\$absdir\" && thisdir=\"\$absdir\"
- # Export the path to the program.
- PATH="\$progdir:\$PATH"
- export PATH
-EOF
+ progdir=\"\$thisdir/$objdir\"
+ program='$output'
- # Export our shlibpath_var if we have one.
- if test -n "$shlibpath_var" && test -n "$temp_rpath"; then
- cat >> $output <<EOF
+ if test -f \"\$progdir/\$program\"; then"
+ # Export our shlibpath_var if we have one.
+ if test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ $echo >> $output "\
# Add our own library path to $shlibpath_var
- $shlibpath_var="$temp_rpath\$$shlibpath_var"
+ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
# Some systems cannot cope with colon-terminated $shlibpath_var
- $shlibpath_var=\`echo \$$shlibpath_var | sed -e 's/:*\$//'\`
+ $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/:*\$//'\`
export $shlibpath_var
-EOF
- fi
+"
+ fi
- cat >> $output <<EOF
+ $echo >> $output "\
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ # Run the actual program with our arguments.
- eval "exec \$program \$args"
+ # Export the path to the program.
+ PATH=\"\$progdir:\$PATH\"
+ export PATH
- echo "\$0: cannot exec \$program \$args"
- exit 1
+ exec \$program \${1+\"\$@\"}
+
+ \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
+ exit 1
+ fi
else
# The program doesn't exist.
- echo "\$0: error: \$progdir/\$program does not exist" 1>&2
- echo "This script is just a wrapper for \$program." 1>&2
- echo "See the $PACKAGE documentation for more information." 1>&2
+ \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
+ \$echo \"This script is just a wrapper for \$program.\" 1>&2
+ echo \"See the $PACKAGE documentation for more information.\" 1>&2
exit 1
fi
-fi
-EOF
- chmod +x $output
+fi\
+"
+ chmod +x $output
fi
exit 0
;;
esac
-
# See if we need to build an old-fashioned archive.
if test "$build_old_libs" = "yes"; then
- # Now set the variables for building old libraries.
- oldlib="$objdir/$libname.a"
-
# Transform .lo files to .o files.
- oldobjs="$objs"`echo "$libobjs " | sed 's/[^ ]*\.a //g; s/\.lo /.o /g; s/ $//g'`
+ oldobjs="$objs"`$echo "X$libobjs " | $Xsed -e 's/[^ ]*\.a //g' -e 's/\.lo /.o /g' -e 's/ $//g'`
- if test -d "$objdir"; then
- $show "$rm $oldlib"
- $run $rm $oldlib
+ # Do each command in the archive commands.
+ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+ eval cmds=\"$old_archive_from_new_cmds\"
else
- $show "$mkdir $objdir"
- $run $mkdir $objdir
+ eval cmds=\"$old_archive_cmds\"
fi
-
- # Do each command in the archive commands.
- cmds=`eval echo \"$old_archive_cmds\"`
IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
for cmd in $cmds; do
IFS="$save_ifs"
$show "$cmd"
- $run eval "$cmd" || exit $?
+ $run eval "$cmd" || exit $?
done
IFS="$save_ifs"
fi
@@ -1081,13 +1616,13 @@ EOF
old_library=
test "$build_old_libs" = yes && old_library="$libname.a"
- echo "creating $output"
+ $show "creating $output"
# Only create the output if not a dry run.
if test -z "$run"; then
- cat > $output <<EOF
+ $echo > $output "\
# $output - a libtool library file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION
+# Generated by ltmain.sh - GNU $PACKAGE $VERSION
# The name that we can dlopen(3).
dlname='$dlname'
@@ -1098,14 +1633,17 @@ library_names='$library_names'
# The name of the static archive.
old_library='$old_library'
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
# Version information for $libname.
current=$current
age=$age
revision=$revision
# Directory that this library needs to be installed in:
-libdir='$install_libdir'
-EOF
+libdir='$install_libdir'\
+"
fi
# Do a symbolic link so that the libtool archive can be found in
@@ -1119,19 +1657,36 @@ EOF
# libtool install mode
install)
- progname="$progname: install"
+ modename="$modename: install"
- # The first argument is the name of the installation program.
- install_prog="$nonopt"
- install_prog_shell=""
-
- # CYGNUS LOCAL: Handle /bin/sh at the start.
- if test "$install_prog" = "${CONFIG_SHELL}"; then
- install_prog_shell="$install_prog "
- install_prog="$1"
+ # There may be an optional /bin/sh argument at the beginning of
+ # install_prog (especially on Windows NT).
+ if test "$nonopt" = "$SHELL"; then
+ # Aesthetically quote it.
+ arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
+ case "$arg" in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ arg="\"$arg\""
+ ;;
+ esac
+ install_prog="$arg "
+ arg="$1"
shift
+ else
+ install_prog=
+ arg="$nonopt"
fi
+ # The real first argument should be the name of the installation program.
+ # Aesthetically quote it.
+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+ case "$arg" in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ arg="\"$arg\""
+ ;;
+ esac
+ install_prog="$install_prog$arg"
+
# We need to accept at least all the BSD install flags.
dest=
files=
@@ -1144,8 +1699,8 @@ EOF
do
if test -n "$dest"; then
files="$files $dest"
- dest="$arg"
- continue
+ dest="$arg"
+ continue
fi
case "$arg" in
@@ -1155,48 +1710,56 @@ EOF
-m) prev="-m" ;;
-o) prev="-o" ;;
-s)
- stripme=" -s"
- continue
- ;;
+ stripme=" -s"
+ continue
+ ;;
-*) ;;
*)
- # If the previous option needed an argument, then skip it.
- if test -n "$prev"; then
- prev=
- else
- dest="$arg"
- continue
- fi
+ # If the previous option needed an argument, then skip it.
+ if test -n "$prev"; then
+ prev=
+ else
+ dest="$arg"
+ continue
+ fi
;;
esac
+
+ # Aesthetically quote the argument.
+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+ case "$arg" in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ arg="\"$arg\""
+ ;;
+ esac
install_prog="$install_prog $arg"
done
if test -z "$install_prog"; then
- echo "$progname: you must specify an install program" 1>&2
- echo "$help" 1>&2
+ $echo "$modename: you must specify an install program" 1>&2
+ $echo "$help" 1>&2
exit 1
fi
if test -n "$prev"; then
- echo "$progname: the \`$prev' option requires an argument" 1>&2
- echo "$help" 1>&2
+ $echo "$modename: the \`$prev' option requires an argument" 1>&2
+ $echo "$help" 1>&2
exit 1
fi
if test -z "$files"; then
if test -z "$dest"; then
- echo "$progname: no file or destination specified" 1>&2
+ $echo "$modename: no file or destination specified" 1>&2
else
- echo "$progname: you must specify a destination" 1>&2
+ $echo "$modename: you must specify a destination" 1>&2
fi
- echo "$help" 1>&2
+ $echo "$help" 1>&2
exit 1
fi
# Strip any trailing slash from the destination.
- dest=`echo "$dest" | sed 's%/$%%'`
+ dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
# Check to see that the destination is a directory.
test -d "$dest" && isdir=yes
@@ -1204,34 +1767,38 @@ EOF
destdir="$dest"
destname=
else
- destdir=`echo "$dest" | sed 's%/[^/]*$%%'`
- test "$destdir" = "$dest" && destdir=.
- destname=`echo "$dest" | sed 's%^.*/%%'`
+ destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
+ test "X$destdir" = "X$dest" && destdir=.
+ destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
# Not a directory, so check to see that there is only one file specified.
set dummy $files
if test $# -gt 2; then
- echo "$progname: \`$dest' is not a directory" 1>&2
- echo "$help" 1>&2
- exit 1
+ $echo "$modename: \`$dest' is not a directory" 1>&2
+ $echo "$help" 1>&2
+ exit 1
fi
fi
case "$destdir" in
- /*) ;;
+ /* | [A-Za-z]:\\*) ;;
*)
for file in $files; do
- case "$file" in
- *.lo) ;;
- *)
- echo "$progname: \`$destdir' must be an absolute directory name" 1>&2
- echo "$help" 1>&2
- exit 1
- ;;
- esac
+ case "$file" in
+ *.lo) ;;
+ *)
+ $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ ;;
+ esac
done
;;
esac
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
+
staticlibs=
future_libdirs=
current_libdirs=
@@ -1240,69 +1807,59 @@ EOF
# Do each installation.
case "$file" in
*.a)
- # Do the static libraries later.
- staticlibs="$staticlibs $file"
- ;;
+ # Do the static libraries later.
+ staticlibs="$staticlibs $file"
+ ;;
*.la)
- # Check to see that this really is a libtool archive.
- if egrep "^# Generated by $PROGRAM" $file >/dev/null 2>&1; then :
- else
- echo "$progname: \`$file' is not a valid libtool archive" 1>&2
- echo "$help" 1>&2
- exit 1
- fi
+ # Check to see that this really is a libtool archive.
+ if (sed -e '2q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then :
+ else
+ $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
- library_names=
- old_library=
- # If there is no directory component, then add one.
- case "$file" in
- */*) . $file ;;
- *) . ./$file ;;
- esac
+ library_names=
+ old_library=
+ # If there is no directory component, then add one.
+ case "$file" in
+ */* | *\\*) . $file ;;
+ *) . ./$file ;;
+ esac
- # Add the libdir to current_libdirs if it is the destination.
- if test "$destdir" = "$libdir"; then
- case "$current_libdirs " in
- "* $libdir *") ;;
- *) current_libdirs="$current_libdirs $libdir" ;;
- esac
- else
- # Note the libdir as a future libdir.
- case "$future_libdirs " in
- "* $libdir *") ;;
- *) future_libdirs="$future_libdirs $libdir" ;;
- esac
- fi
+ # Add the libdir to current_libdirs if it is the destination.
+ if test "X$destdir" = "X$libdir"; then
+ case "$current_libdirs " in
+ *" $libdir "*) ;;
+ *) current_libdirs="$current_libdirs $libdir" ;;
+ esac
+ else
+ # Note the libdir as a future libdir.
+ case "$future_libdirs " in
+ *" $libdir "*) ;;
+ *) future_libdirs="$future_libdirs $libdir" ;;
+ esac
+ fi
- dir="`echo "$file" | sed 's%/[^/]*$%%'`/"
- test "$dir" = "$file/" && dir=
- dir="$dir$objdir"
-
- # See the names of the shared library.
- set dummy $library_names
- if test -n "$2"; then
- realname="$2"
- shift
- shift
-
- # Install the shared library and build the symlinks.
- $show "$install_prog_shell$install_prog $dir/$realname $destdir/$realname"
- $run eval "$install_prog_shell$install_prog $dir/$realname $destdir/$realname" || exit $?
- test "X$dlname" = "X$realname" && dlname=
-
- # Support stripping libraries.
- if test -n "$stripme"; then
- if test -n "$striplib"; then
- $show "$striplib $destdir/$realname"
- $run $striplib $destdir/$realname || exit $?
- else
- echo "$progname: warning: no library stripping program" 1>&2
- fi
- fi
+ dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/"
+ test "X$dir" = "X$file/" && dir=
+ dir="$dir$objdir"
+
+ # See the names of the shared library.
+ set dummy $library_names
+ if test -n "$2"; then
+ realname="$2"
+ shift
+ shift
+
+ # Install the shared library and build the symlinks.
+ $show "$install_prog $dir/$realname $destdir/$realname"
+ $run eval "$install_prog $dir/$realname $destdir/$realname" || exit $?
+ test "X$dlname" = "X$realname" && dlname=
- if test $# -gt 0; then
- # Delete the old symlinks.
+ if test $# -gt 0; then
+ # Delete the old symlinks.
rmcmd="$rm"
for linkname
do
@@ -1311,179 +1868,161 @@ EOF
$show "$rmcmd"
$run $rmcmd
- # ... and create new ones.
- for linkname
- do
- test "X$dlname" = "X$linkname" && dlname=
- $show "(cd $destdir && $LN_S $realname $linkname)"
- $run eval "(cd $destdir && $LN_S $realname $linkname)"
- done
- fi
-
- if test -n "$dlname"; then
- # Install the dynamically-loadable library.
- $show "$install_prog_shell$install_prog $dir/$dlname $destdir/$dlname"
- $run eval "$install_prog_shell$install_prog $dir/$dlname $destdir/$dlname" || exit $?
- fi
-
- # Do each command in the postinstall commands.
- lib="$destdir/$realname"
- cmds=`eval echo \"$postinstall_cmds\"`
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- fi
+ # ... and create new ones.
+ for linkname
+ do
+ test "X$dlname" = "X$linkname" && dlname=
+ $show "(cd $destdir && $LN_S $realname $linkname)"
+ $run eval "(cd $destdir && $LN_S $realname $linkname)"
+ done
+ fi
+
+ if test -n "$dlname"; then
+ # Install the dynamically-loadable library.
+ $show "$install_prog $dir/$dlname $destdir/$dlname"
+ $run eval "$install_prog $dir/$dlname $destdir/$dlname" || exit $?
+ fi
+
+ # Do each command in the postinstall commands.
+ lib="$destdir/$realname"
+ eval cmds=\"$postinstall_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+ fi
- # Install the pseudo-library for information purposes.
- name=`echo "$file" | sed 's%^.*/%%'`
- $show "$install_prog_shell$install_prog $file $destdir/$name"
- $run $install_prog_shell$install_prog $file $destdir/$name || exit $?
+ # Install the pseudo-library for information purposes.
+ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+ $show "$install_prog $file $destdir/$name"
+ $run eval "$install_prog $file $destdir/$name" || exit $?
- # Maybe install the static library, too.
- test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
- ;;
+ # Maybe install the static library, too.
+ test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+ ;;
*.lo)
# Install (i.e. copy) a libtool object.
# Figure out destination file name, if it wasn't already specified.
if test -n "$destname"; then
- destfile="$destdir/$destname"
- else
- destfile=`echo "$file" | sed 's%^.*/%%;'`
- destfile="$destdir/$destfile"
+ destfile="$destdir/$destname"
+ else
+ destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+ destfile="$destdir/$destfile"
fi
- # Deduce the name of the destination old-style object file.
- case "$destfile" in
- *.lo)
- staticdest=`echo "$destfile" | sed 's/\.lo$/\.o/;'`
- ;;
- *.o)
- staticdest="$destfile"
- destfile=
- ;;
- *)
- echo "$progname: cannot copy a libtool object to \`$destfile'" 1>&2
- echo "$help" 1>&2
- exit 1
+ # Deduce the name of the destination old-style object file.
+ case "$destfile" in
+ *.lo)
+ staticdest=`$echo "X$destfile" | $Xsed -e 's/\.lo$/\.o/'`
;;
- esac
+ *.o)
+ staticdest="$destfile"
+ destfile=
+ ;;
+ *)
+ $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ ;;
+ esac
- # Install the libtool object if requested.
- if test -n "$destfile"; then
- $show "$install_prog_shell$install_prog $file $destfile"
- $run $install_prog_shell$install_prog $file $destfile || exit $?
- fi
+ # Install the libtool object if requested.
+ if test -n "$destfile"; then
+ $show "$install_prog $file $destfile"
+ $run eval "$install_prog $file $destfile" || exit $?
+ fi
- # Install the old object if enabled.
- if test "$build_old_libs" = yes; then
- # Deduce the name of the old-style object file.
- staticobj=`echo "$file" | sed 's/\.lo$/\.o/;'`
+ # Install the old object if enabled.
+ if test "$build_old_libs" = yes; then
+ # Deduce the name of the old-style object file.
+ staticobj=`$echo "X$file" | $Xsed -e 's/\.lo$/\.o/'`
- $show "$install_prog_shell$install_prog $staticobj $staticdest"
- $run $install_prog_shell$install_prog $staticobj $staticdest || exit $?
- fi
- exit 0
- ;;
+ $show "$install_prog $staticobj $staticdest"
+ $run eval "$install_prog \$staticobj \$staticdest" || exit $?
+ fi
+ exit 0
+ ;;
*)
- # Do a test to see if this is really a libtool program.
- if egrep "^# Generated by $PROGRAM" $file >/dev/null 2>&1; then
- # This variable tells wrapper scripts just to set variables rather
- # than running their programs.
- libtool_install_magic="$magic"
- link_against_libtool_libs=
- finalize_command=
-
- # If there is no directory component, then add one.
- case "$file" in
- */*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Check the variables that should have been set.
- if test -z "$link_against_libtool_libs" || test -z "$finalize_command"; then
- echo "$progname: invalid libtool wrapper script \`$file'" 1>&2
- exit 1
- fi
-
- finalize=yes
- for lib in $link_against_libtool_libs; do
- # Check to see that each library is installed.
- libdir=
- if test -f "$lib"; then
- # If there is no directory component, then add one.
- case "$lib" in
- */*) . $lib ;;
- *) . ./$lib ;;
- esac
- fi
- libfile="$libdir/`echo "$lib" | sed 's%^.*/%%g'`"
- if test -z "$libdir"; then
- echo "$progname: warning: \`$lib' contains no -rpath information" 1>&2
- elif test -f "$libfile"; then :
- else
- echo "$progname: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
- finalize=no
- fi
- done
-
- if test "$hardcode_action" = relink; then
- if test "$finalize" = yes; then
- echo "$progname: warning: relinking \`$file' on behalf of your buggy system linker" 1>&2
- $show "$finalize_command"
- if $run $finalize_command; then :
- else
- echo "$progname: error: relink \`$file' with the above command before installing it" 1>&2
- continue
- fi
- file="$objdir/$file"T
- else
- echo "$progname: warning: cannot relink \`$file' on behalf of your buggy system linker" 1>&2
- fi
- else
- # Install the binary that we compiled earlier.
- dir=`echo "$file" | sed 's%/[^/]*$%%'`
- if test "$file" = "$dir"; then
- file="$objdir/$file"
- else
- file="$dir/$objdir/`echo "$file" | sed 's%^.*/%%'`"
- fi
- fi
- fi
+ # Do a test to see if this is really a libtool program.
+ if (sed -e '4q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then
+ link_against_libtool_libs=
+ finalize_command=
+
+ # If there is no directory component, then add one.
+ case "$file" in
+ */* | *\\*) . $file ;;
+ *) . ./$file ;;
+ esac
+
+ # Check the variables that should have been set.
+ if test -z "$link_against_libtool_libs" || test -z "$finalize_command"; then
+ $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
+ exit 1
+ fi
+
+ finalize=yes
+ for lib in $link_against_libtool_libs; do
+ # Check to see that each library is installed.
+ libdir=
+ if test -f "$lib"; then
+ # If there is no directory component, then add one.
+ case "$lib" in
+ */* | *\\*) . $lib ;;
+ *) . ./$lib ;;
+ esac
+ fi
+ libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`"
+ if test -z "$libdir"; then
+ $echo "$modename: warning: \`$lib' contains no -rpath information" 1>&2
+ elif test -f "$libfile"; then :
+ else
+ $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
+ finalize=no
+ fi
+ done
+
+ if test "$hardcode_action" = relink; then
+ if test "$finalize" = yes; then
+ $echo "$modename: warning: relinking \`$file' on behalf of your buggy system linker" 1>&2
+ $show "$finalize_command"
+ if $run eval "$finalize_command"; then :
+ else
+ $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+ continue
+ fi
+ file="$objdir/$file"T
+ else
+ $echo "$modename: warning: cannot relink \`$file' on behalf of your buggy system linker" 1>&2
+ fi
+ else
+ # Install the binary that we compiled earlier.
+ file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+ fi
+ fi
- $show "$install_prog_shell$install_prog$stripme $file $dest"
- $run $install_prog_shell$install_prog$stripme $file $dest || exit $?
- ;;
+ $show "$install_prog$stripme $file $dest"
+ $run eval "$install_prog\$stripme \$file \$dest" || exit $?
+ ;;
esac
done
for file in $staticlibs; do
- name=`echo "$file" | sed 's%^.*/%%'`
+ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
# Set up the ranlib parameters.
oldlib="$destdir/$name"
- $show "$install_prog_shell$install_prog $file $oldlib"
- $run $install_prog_shell$install_prog $file $oldlib || exit $?
-
- # Support stripping libraries.
- if test -n "$stripme"; then
- if test -n "$old_striplib"; then
- $show "$old_striplib $oldlib"
- $run $old_striplib $oldlib || exit $?
- else
- echo "$progname: warning: no static library stripping program" 1>&2
- fi
- fi
+ $show "$install_prog $file $oldlib"
+ $run eval "$install_prog \$file \$oldlib" || exit $?
# Do each command in the postinstall commands.
- cmds=`eval echo \"$old_postinstall_cmds\"`
+ eval cmds=\"$old_postinstall_cmds\"
IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
for cmd in $cmds; do
IFS="$save_ifs"
@@ -1494,106 +2033,218 @@ EOF
done
if test -n "$future_libdirs"; then
- echo "$progname: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
+ $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
fi
if test -n "$current_libdirs"; then
# Maybe just do a dry run.
test -n "$run" && current_libdirs=" -n$current_libdirs"
- ${CONFIG_SHELL} $0 --finish$current_libdirs
- exit $?
+ exec $SHELL $0 --finish$current_libdirs
+ exit 1
fi
exit 0
;;
- # libtool dlname mode
- dlname)
- progname="$progname: dlname"
- ltlibs="$nonopt"
- for lib
- do
- ltlibs="$ltlibs $lib"
+ # libtool finish mode
+ finish)
+ modename="$modename: finish"
+ libdirs="$nonopt"
+
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ for dir
+ do
+ libdirs="$libdirs $dir"
+ done
+
+ for libdir in $libdirs; do
+ if test -n "$finish_cmds"; then
+ # Do each command in the finish commands.
+ eval cmds=\"$finish_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd"
+ done
+ IFS="$save_ifs"
+ fi
+ if test -n "$finish_eval"; then
+ # Do the single finish_eval.
+ eval cmds=\"$finish_eval\"
+ $run eval "$cmds"
+ fi
+ done
+ fi
+
+ echo "------------------------------------------------------------------------------"
+ echo "Libraries have been installed in:"
+ for libdir in $libdirs; do
+ echo " $libdir"
done
+ echo
+ echo "To link against installed libraries in a given directory, LIBDIR,"
+ echo "you must use the \`-LLIBDIR' flag during linking."
+ echo
+ echo " You will also need to do one of the following:"
+ if test -n "$shlibpath_var"; then
+ echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
+ echo " during execution"
+ fi
+ if test -n "$runpath_var"; then
+ echo " - add LIBDIR to the \`$runpath_var' environment variable"
+ echo " during linking"
+ fi
+ if test -n "$hardcode_libdir_flag_spec"; then
+ libdir=LIBDIR
+ eval flag=\"$hardcode_libdir_flag_spec\"
- if test -z "$ltlibs"; then
- echo "$progname: you must specify at least one LTLIBRARY" 1>&2
- echo "$help" 1>&2
- exit 1
+ echo " - use the \`$flag' linker flag"
+ fi
+ if test -f /etc/ld.so.conf; then
+ echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
fi
+ echo
+ echo "See any operating system documentation about shared libraries for"
+ echo "more information, such as the ld(1) and ld.so(8) manual pages."
+ echo "------------------------------------------------------------------------------"
+ exit 0
+ ;;
- # Now check to make sure each one is a valid libtool library.
- status=0
- for lib in $ltlibs; do
- dlname=
- libdir=
- library_names=
+ # libtool execute mode
+ execute)
+ modename="$modename: execute"
+
+ # The first argument is the command name.
+ cmd="$nonopt"
+ if test -z "$cmd"; then
+ $echo "$modename: you must specify a COMMAND" 1>&2
+ $echo "$help"
+ exit 1
+ fi
- # Check to see that this really is a libtool archive.
- if egrep "^# Generated by $PROGRAM" $arg >/dev/null 2>&1; then :
+ # Handle -dlopen flags immediately.
+ for file in $execute_dlfiles; do
+ if test -f "$file"; then :
else
- echo "$progname: \`$arg' is not a valid libtool archive" 1>&2
- status=1
- continue
+ $echo "$modename: \`$file' is not a file" 1>&2
+ $echo "$help" 1>&2
+ exit 1
fi
- # If there is no directory component, then add one.
- case "$arg" in
- */*) . $arg ;;
- *) . ./$arg ;;
+ dir=
+ case "$file" in
+ *.la)
+ # Check to see that this really is a libtool archive.
+ if (sed -e '2q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then :
+ else
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
+ # Read the libtool library.
+ dlname=
+ library_names=
+
+ # If there is no directory component, then add one.
+ case "$file" in
+ */* | *\\*) . $file ;;
+ *) . ./$file ;;
+ esac
+
+ # Skip this library if it cannot be dlopened.
+ if test -z "$dlname"; then
+ # Warn if it was a shared library.
+ test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
+ continue
+ fi
+
+ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+ test "X$dir" = "X$file" && dir=.
+
+ if test -f "$dir/$objdir/$dlname"; then
+ dir="$dir/$objdir"
+ else
+ $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+ exit 1
+ fi
+ ;;
+
+ *.lo)
+ # Just add the directory containing the .lo file.
+ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+ test "X$dir" = "X$file" && dir=.
+ ;;
+
+ *)
+ $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
+ continue
+ ;;
esac
- if test -z "$libdir"; then
- echo "$progname: \`$arg' contains no -rpath information" 1>&2
- status=1
- elif test -n "$dlname"; then
- echo "$libdir/$dlname"
- elif test -z "$library_names"; then
- echo "$progname: \`$arg' is not a shared library" 1>&2
- status=1
+ # Get the absolute pathname.
+ absdir=`cd "$dir" && pwd`
+ test -n "$absdir" && dir="$absdir"
+
+ # Now add the directory to shlibpath_var.
+ if eval "test -z \"\$$shlibpath_var\""; then
+ eval "$shlibpath_var=\"\$dir\""
else
- echo "$progname: \`$arg' was not linked with \`-export-dynamic'" 1>&2
- status=1
+ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
fi
done
- exit $status
- ;;
- # libtool finish mode
- finish)
- progname="$progname: finish"
- libdirs="$nonopt"
+ # This variable tells wrapper scripts just to set shlibpath_var
+ # rather than running their programs.
+ libtool_execute_magic="$magic"
- if test -n "$finish_cmds" && test -n "$libdirs"; then
- for dir
- do
- libdirs="$libdirs $dir"
- done
+ # Check if any of the arguments is a wrapper script.
+ args=
+ for file
+ do
+ case "$file" in
+ -*) ;;
+ *)
+ # Do a test to see if this is really a libtool program.
+ if (sed -e '4q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then
+ # If there is no directory component, then add one.
+ case "$file" in
+ */* | *\\*) . $file ;;
+ *) . ./$file ;;
+ esac
- for libdir in $libdirs; do
- # Do each command in the postinstall commands.
- cmds=`eval echo \"$finish_cmds\"`
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd"
- done
- IFS="$save_ifs"
- done
- fi
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
+ fi
+ ;;
+ esac
+ # Quote arguments (to preserve shell metacharacters).
+ file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
+ args="$args \"$file\""
+ done
- echo "To link against installed libraries in LIBDIR, users may have to:"
- if test -n "$shlibpath_var"; then
- echo " - add LIBDIR to their \`$shlibpath_var' environment variable"
+ if test -z "$run"; then
+ # Export the shlibpath_var.
+ eval "export $shlibpath_var"
+
+ # Now actually exec the command.
+ eval "exec \$cmd$args"
+
+ $echo "$modename: cannot exec \$cmd$args"
+ exit 1
+ else
+ # Display what would be done.
+ eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
+ $echo "export $shlibpath_var"
+ $echo "$cmd$args"
+ exit 0
fi
- echo " - use the \`-LLIBDIR' linker flag"
- exit 0
;;
# libtool uninstall mode
uninstall)
- progname="$progname: uninstall"
+ modename="$modename: uninstall"
rm="$nonopt"
files=
@@ -1606,66 +2257,97 @@ EOF
done
if test -z "$rm"; then
- echo "$progname: you must specify an RM program" 1>&2
- echo "$help" 1>&2
+ $echo "$modename: you must specify an RM program" 1>&2
+ $echo "$help" 1>&2
exit 1
fi
for file in $files; do
- dir=`echo "$file" | sed -e 's%/[^/]*$%%'`
- test "$dir" = "$file" && dir=.
- name=`echo "$file" | sed -e 's%^.*/%%'`
+ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+ test "X$dir" = "X$file" && dir=.
+ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
rmfiles="$file"
case "$name" in
*.la)
- # Possibly a libtool archive, so verify it.
- if egrep "^# Generated by $PROGRAM" $file >/dev/null 2>&1; then
- . $dir/$name
-
- # Delete the libtool libraries and symlinks.
- for n in $library_names; do
- rmfiles="$rmfiles $dir/$n"
- test "X$n" = "X$dlname" && dlname=
- done
- test -n "$dlname" && rmfiles="$rmfiles $dir/$dlname"
- test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library"
+ # Possibly a libtool archive, so verify it.
+ if (sed -e '2q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then
+ . $dir/$name
+
+ # Delete the libtool libraries and symlinks.
+ for n in $library_names; do
+ rmfiles="$rmfiles $dir/$n"
+ test "X$n" = "X$dlname" && dlname=
+ done
+ test -n "$dlname" && rmfiles="$rmfiles $dir/$dlname"
+ test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library"
+
+ $show "$rm $rmfiles"
+ $run $rm $rmfiles
+
+ if test -n "$library_names"; then
+ # Do each command in the postuninstall commands.
+ eval cmds=\"$postuninstall_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd"
+ done
+ IFS="$save_ifs"
+ fi
- # FIXME: should reinstall the best remaining shared library.
- fi
- ;;
+ if test -n "$old_library"; then
+ # Do each command in the old_postuninstall commands.
+ eval cmds=\"$old_postuninstall_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd"
+ done
+ IFS="$save_ifs"
+ fi
+
+ # FIXME: should reinstall the best remaining shared library.
+ fi
+ ;;
*.lo)
- if test "$build_old_libs" = yes; then
- oldobj=`echo "$name" | sed 's/\.lo$/\.o/'`
- rmfiles="$rmfiles $dir/$oldobj"
- fi
- ;;
- esac
+ if test "$build_old_libs" = yes; then
+ oldobj=`$echo "X$name" | $Xsed -e 's/\.lo$/\.o/'`
+ rmfiles="$rmfiles $dir/$oldobj"
+ fi
+ $show "$rm $rmfiles"
+ $run $rm $rmfiles
+ ;;
- $show "$rm $rmfiles"
- $run $rm $rmfiles
+ *)
+ $show "$rm $rmfiles"
+ $run $rm $rmfiles
+ ;;
+ esac
done
exit 0
;;
- NONE)
- echo "$progname: you must specify a MODE" 1>&2
- echo "$generic_help" 1>&2
+ "")
+ $echo "$modename: you must specify a MODE" 1>&2
+ $echo "$generic_help" 1>&2
exit 1
;;
esac
- echo "$progname: invalid operation mode \`$mode'" 1>&2
- echo "$generic_help" 1>&2
+ $echo "$modename: invalid operation mode \`$mode'" 1>&2
+ $echo "$generic_help" 1>&2
exit 1
fi # test -z "$show_help"
# We need to display help for each of the modes.
case "$mode" in
-NONE) cat <<EOF
-Usage: $progname [OPTION]... [MODE-ARG]...
+"") $echo \
+"Usage: $modename [OPTION]... [MODE-ARG]...
Provide generalized library-building support services.
@@ -1674,25 +2356,27 @@ Provide generalized library-building support services.
--finish same as \`--mode=finish'
--help display this help message and exit
--mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]
+ --quiet same as \`--silent'
+ --silent don't print informational messages
--version print version information
MODE must be one of the following:
compile compile a source file into a libtool object
- dlname print filenames to use to \`dlopen' libtool libraries
+ execute automatically set library path, then run a program
finish complete the installation of libtool libraries
install install libraries or executables
link create a library or an executable
uninstall remove libraries from an installed directory
-MODE-ARGS vary depending on the MODE. Try \`$progname --help --mode=MODE' for
-a more detailed description of MODE.
-EOF
+MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for
+a more detailed description of MODE."
+ exit 0
;;
compile)
- cat <<EOF
-Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+ $echo \
+"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
Compile a source file into a libtool library object.
@@ -1701,39 +2385,44 @@ from the given SOURCEFILE.
The output file name is determined by removing the directory component from
SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'.
-EOF
+library object suffix, \`.lo'."
;;
-dlname)
- cat <<EOF
-Usage: $progname [OPTION]... --mode=dlname LTLIBRARY...
+execute)
+ $echo \
+"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
-Print filenames to use to \`dlopen' libtool libraries.
+ -dlopen FILE add the directory containing FILE to the library path
-Each LTLIBRARY is the name of a dynamically loadable libtool library (one that
-was linked using the \`-export-dynamic' option).
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
-The names to use are printed to standard output, one per line.
-EOF
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
;;
finish)
- cat <<EOF
-Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+ $echo \
+"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
Complete the installation of libtool libraries.
Each LIBDIR is a directory that contains libtool libraries.
The commands that this mode executes may require superuser privileges. Use
-the \`--dry-run' option if you just want to see what would be executed.
-EOF
+the \`--dry-run' option if you just want to see what would be executed."
;;
install)
- cat <<EOF
-Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+ $echo \
+"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
Install executables or libraries.
@@ -1741,13 +2430,12 @@ INSTALL-COMMAND is the installation command. The first component should be
either the \`install' or \`cp' program.
The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized).
-EOF
+BSD-compatible install options are recognized)."
;;
link)
- cat <<EOF
-Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+ $echo \
+"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
Link object files or libraries together to form another library, or to
create an executable program.
@@ -1757,15 +2445,19 @@ a program from several object files.
The following components of LINK-COMMAND are treated specially:
- -allow-undefined allow a libtool library to reference undefined symbols
+ -all-static do not do any dynamic linking at all
+ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
+ -dlpreopen FILE link in FILE and add its symbols to dld_preloaded_symbols
-export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-LLIBDIR search LIBDIR for required installed libraries
-lNAME OUTPUT-FILE requires the installed library libNAME
+ -no-undefined declare that a library does not refer to external symbols
-o OUTPUT-FILE create OUTPUT-FILE from the specified objects
+ -release RELEASE specify package release information
-rpath LIBDIR the created library will eventually be installed in LIBDIR
- -static do not do any dynamic linking or shared library creation
+ -static do not do any dynamic linking of libtool libraries
-version-info CURRENT[:REVISION[:AGE]]
- specify library version info [each variable defaults to 0]
+ specify library version info [each variable defaults to 0]
All other options (arguments beginning with \`-') are ignored.
@@ -1780,13 +2472,12 @@ If OUTPUT-FILE ends in \`.a', then a standard library is created using \`ar'
and \`ranlib'.
If OUTPUT-FILE ends in \`.lo' or \`.o', then a reloadable object file is
-created, otherwise an executable program is created.
-EOF
+created, otherwise an executable program is created."
;;
uninstall)
- cat <<EOF
-Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+ $echo
+"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
Remove libraries from an installation directory.
@@ -1795,23 +2486,18 @@ RM is the name of the program to use to delete files associated with each FILE
to RM.
If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM.
-EOF
+Otherwise, only FILE itself is deleted using RM."
;;
*)
- echo "$progname: invalid operation mode \`$mode'" 1>&2
- echo "$help" 1>&2
+ $echo "$modename: invalid operation mode \`$mode'" 1>&2
+ $echo "$help" 1>&2
exit 1
;;
esac
-case "$mode" in
-archive|compile)
- echo
- echo "Try \`$progname --help' for more information about other modes."
- ;;
-esac
+echo
+$echo "Try \`$modename --help' for more information about other modes."
exit 0
--
GitLab