Commit 358373b2 authored by Qasim's avatar Qasim

initial update

parent 7014acea

Too many changes to show.

To preserve performance only 1000 of 1000+ files are displayed.

/**
******************************************************************************
* @file b-l072z-lrwan1.c
* @author MCD Application Team
* @version V1.0.0
* @date 15-November-2016
* @brief This file contains definitions for:
* - LEDs and push-button available on B-L072Z-LRWAN1 Discovery Kit
* from STMicroelectronics
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "b-l072z-lrwan1.h"
#include <stdlib.h>
/** @addtogroup BSP
* @{
*/
/** @addtogroup B-L072Z-LRWAN1
* @{
*/
/** @addtogroup B-L072Z-LRWAN1_LOW_LEVEL
* @brief This file provides set of firmware functions to manage Leds and push-button
* available on B-L072Z-LRWAN1 Discovery Kit from STMicroelectronics.
* @{
*/
/** @defgroup B-L072Z-LRWAN1_LOW_LEVEL_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup B-L072Z-LRWAN1_LOW_LEVEL_Private_Defines
* @{
*/
/**
* @brief 32L082MLM DISCO BSP Driver version number V1.0.0
*/
#define __B_L072Z_LRWAN1_BSP_VERSION_MAIN (0x01) /*!< [31:24] main version */
#define __B_L072Z_LRWAN1_BSP_VERSION_SUB1 (0x00) /*!< [23:16] sub1 version */
#define __B_L072Z_LRWAN1_BSP_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
#define __B_L072Z_LRWAN1_BSP_VERSION_RC (0x00) /*!< [7:0] release candidate */
#define __B_L072Z_LRWAN1_BSP_VERSION ((__B_L072Z_LRWAN1_BSP_VERSION_MAIN << 24)\
|(__B_L072Z_LRWAN1_BSP_VERSION_SUB1 << 16)\
|(__B_L072Z_LRWAN1_BSP_VERSION_SUB2 << 8 )\
|(__B_L072Z_LRWAN1_BSP_VERSION_RC))
/** @defgroup B-L072Z-LRWAN1_LOW_LEVEL_Private_Variables
* @{
*/
GPIO_TypeDef* LED_PORT[LEDn] = {LED1_GPIO_PORT, LED2_GPIO_PORT, LED3_GPIO_PORT, LED4_GPIO_PORT};
const uint16_t LED_PIN[LEDn] = {LED1_PIN, LED2_PIN,LED3_PIN, LED4_PIN};
GPIO_TypeDef* BUTTON_PORT[BUTTONn] = {KEY_BUTTON_GPIO_PORT };
const uint16_t BUTTON_PIN[BUTTONn] = {KEY_BUTTON_PIN };
const uint8_t BUTTON_IRQn[BUTTONn] = {KEY_BUTTON_EXTI_IRQn };
/**
* @}
*/
/** @defgroup B-L072Z-LRWAN1_LOW_LEVEL_Private_Functions
* @{
*/
/**
* @}
*/
/**
* @brief This method returns the B-L072Z-LRWAN1 BSP Driver revision
* @param None
* @retval version : 0xXYZR (8bits for each decimal, R for RC)
*/
uint32_t BSP_GetVersion(void)
{
return __B_L072Z_LRWAN1_BSP_VERSION;
}
/**
* @brief Configures LED GPIO.
* @param Led: Specifies the Led to be configured.
* This parameter can be one of following parameters:
* @arg LED2
* @retval None
*/
void BSP_LED_Init(Led_TypeDef Led)
{
GPIO_InitTypeDef GPIO_InitStruct;
/* Enable the GPIO_LED Clock */
LEDx_GPIO_CLK_ENABLE( Led );
/* Configure the GPIO_LED pin */
GPIO_InitStruct.Pin = LED_PIN[Led];
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
HAL_GPIO_Init(LED_PORT[Led], &GPIO_InitStruct);
}
/**
* @brief Turns selected LED On.
* @param Led: Specifies the Led to be set on.
* This parameter can be one of following parameters:
* @arg LED2
* @retval None
*/
void BSP_LED_On(Led_TypeDef Led)
{
HAL_GPIO_WritePin(LED_PORT[Led], LED_PIN[Led], GPIO_PIN_SET);
}
/**
* @brief Turns selected LED Off.
* @param Led: Specifies the Led to be set off.
* This parameter can be one of following parameters:
* @arg LED2
* @retval None
*/
void BSP_LED_Off(Led_TypeDef Led)
{
HAL_GPIO_WritePin(LED_PORT[Led], LED_PIN[Led], GPIO_PIN_RESET);
}
/**
* @brief Toggles the selected LED.
* @param Led: Specifies the Led to be toggled.
* This parameter can be one of following parameters:
* @arg LED2
* @retval None
*/
void BSP_LED_Toggle(Led_TypeDef Led)
{
HAL_GPIO_TogglePin(LED_PORT[Led], LED_PIN[Led]);
}
/**
* @brief Configures Button GPIO and EXTI Line.
* @param Button: Specifies the Button to be configured.
* This parameter should be: BUTTON_KEY
* @param ButtonMode: Specifies Button mode.
* This parameter can be one of following parameters: